At a glance data:
Maximum Power:
24.6hp
Maximum Torque:
63.4lb-ft @ 1600 rpm
Rated Speed:
2400 rpm
Minimum Power:
24.6hp
Overview
The C1.1 and C1.1T are indirect injection industrial diesel engines meeting China Nonroad Stage IV emission standards without the need for electronic control, aftertreatment or exhaust gas recirculation. Available as naturally aspirated or turbocharged for improved low speed torque, we also offer a range of factory configurable options to minimize the cost of machine development and of manufacturing if equipped with e-controller
Category:
Industrial Diesel Engines
Category:
Industrial Diesel Engines
Brand:
Caterpillar
Brand:
Caterpillar
Power Rating
Maximum Power:
24.6hp
Maximum Torque:
63.4lb-ft @ 1600 rpm
Rated Speed:
2400 rpm
Minimum Power:
24.6hp
Emission Standards
Emissions:
China Nonroad Stage IV
General
Engine Configuration:
In-line-3
Bore:
3in
Stroke:
3.2in
Displacement:
67.1in³
Compression Ratio:
22.1:1
Aspiration:
Naturally Aspirated (NA)/Turbocharged (T)
Combustion System:
indirect injection
Rotation from Flywheel End:
counterclockwise
Total Lubricating Oil Capacity:
1.16gal (US)
Engine Dimensions - Approximate
Length:
19.6in
Width:
20.1in
Height:
23.1in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments:
211lb
Standard Equipment
air inlet system
- Inlet manifold with choice of inlets
air inlet system
- Inlet manifold with choice of inlets.
control system
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
cooling system
- Belt-driven coolant pump
- Coolant temperature switch
flywheel and flywheel housing
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
fuel system
- Fuel injection pump
- Spin-on fuel filter
lube system
- Low profile oil pan
- Spin-on lube oil filter
- Lube oil pressure switch
power take off (pto)
- Provision for Power Take Off (PTO)
general
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
Optional Equipment
Similar Products
Cat® C0.5 Diesel Engine
Maximum Power:
24.6hp
Maximum Torque:
63.4lb-ft @ 1600 rpm
Rated Speed:
2400 rpm
Minimum Power:
24.6hp
Cat C4.4 Diesel Engine
Maximum Power:
24.6hp
Maximum Torque:
63.4lb-ft @ 1600 rpm
Rated Speed:
2400 rpm
Minimum Power:
24.6hp
Cat® C27 Diesel Engine
Maximum Power:
24.6hp
Maximum Torque:
63.4lb-ft @ 1600 rpm
Rated Speed:
2400 rpm
Minimum Power:
24.6hp