At a glance data:
Maximum Power:
24.6hp
Maximum Torque:
63.4lb-ft @ 1600 rpm
Rated Speed:
2800 rpm
Minimum Power:
24.6hp
Overview
The C1.1 and C1.1T are indirect injection industrial diesel engines meeting EU Stage V emission standards without the need for electronic control, aftertreatment or exhaust gas recirculation. Available as naturally aspirated or turbocharged for improved low speed torque, we also offer a range of factory configurable options to minimize the cost of machine development and of manufacturing if equipped with e-controller
Category:
Industrial Diesel Engines
Category:
Industrial Diesel Engines
Brand:
Caterpillar
Brand:
Caterpillar
Power Rating
Maximum Power:
24.6hp
Maximum Torque:
63.4lb-ft @ 1600 rpm
Rated Speed:
2800 rpm
Minimum Power:
24.6hp
Emission Standards
Emissions:
EU Stage V
General
Engine Configuration:
In-line-3
Bore:
3in
Stroke:
3.2in
Displacement:
67.1in³
Compression Ratio:
22.1:1
Aspiration:
Naturally Aspirated (NA)/Turbocharged (T)
Combustion System:
indirect injection
Rotation from Flywheel End:
counterclockwise
Total Lubricating Oil Capacity:
1.16gal (US)
Engine Dimensions - Approximate
Length:
19.6in
Width:
20.1in
Height:
23.1in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments:
238lb
Standard Equipment
air inlet system
- Inlet manifold with choice of inlets
air inlet system
- Inlet manifold with choice of inlets.
control system
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
cooling system
- Belt-driven coolant pump
- Coolant temperature switch
flywheel and flywheel housing
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
fuel system
- Fuel injection pump
- Spin-on fuel filter
lube system
- Low profile oil pan
- Spin-on lube oil filter
- Lube oil pressure switch
power take off (pto)
- Provision for Power Take Off (PTO)
general
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
Optional Equipment
Similar Products
Cat® C0.5 Diesel Engine
Maximum Power:
24.6hp
Maximum Torque:
63.4lb-ft @ 1600 rpm
Rated Speed:
2800 rpm
Minimum Power:
24.6hp
Cat C4.4 Diesel Engine
Maximum Power:
24.6hp
Maximum Torque:
63.4lb-ft @ 1600 rpm
Rated Speed:
2800 rpm
Minimum Power:
24.6hp
Cat® C27 Diesel Engine
Maximum Power:
24.6hp
Maximum Torque:
63.4lb-ft @ 1600 rpm
Rated Speed:
2800 rpm
Minimum Power:
24.6hp