At a glance data:
Engine Model:
Cat® C15
Net Power - SAE J1349:2011:
405hp
Rated Speed:
1800r/min
Net Power - ISO 9249:2007:
405hp
Overview
Cat wheel dozers are designed with durability built in, ensuring maximum availability through multiple lifecycles. With optimized performance and simplified serviceability, our machines allow you to support your jobsite efficiently and safely while lowering owning and operating costs. The 824 continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.
Category:
Wheel Dozers
Category:
Wheel Dozers
Brand:
Caterpillar
Brand:
Caterpillar
Engine
Engine Model:
Cat® C15
Net Power - SAE J1349:2011:
405hp
Rated Speed:
1800r/min
Net Power - ISO 9249:2007:
405hp
Engine Power - ISO 14396:2002:
426hp
Gross Power - SAE J1995:2014:
434hp
Peak Net Torque (1,300 rpm):
1479lbf·ft
Torque Rise:
33%
Maximum Altitude without Derating (U.S. EPA Tier 4 Final/EU Stage V):
9298ft
Maximum Altitude without Derating (U.S. EPA Tier 3/EU Stage IIIA):
9098ft
Bore:
5.4in
Stroke:
6.7in
Displacement:
927.6in³
High Idle Speed:
2300r/min
Low Idle Speed:
800r/min
Note (1):
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Note (2):
Two engine emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Operating Specifications
Operating Weight – Straight Blade (Tier 4 Final/Stage V):
74966lb
Blade Capacity Range:
5.1-16.2 m3 (6.6-21.2 yd3)
Transmission
Transmission Type:
Cat planetary - powershift - ECPC
Forward - 1:
3.8mile/h
Forward - 2:
6.9mile/h
Forward - 3:
12.2mile/h
Forward - 4:
21.6mile/h
Reverse - 1:
4.3mile/h
Reverse - 2:
7.8mile/h
Reverse - 3:
13.9mile/h
Reverse - 4:
24.7mile/h
Hydraulic System - Lift/Tilt
Pump Flow at 1,800 rpm:
30.9gpm
Main Relief Pressure:
3771psi
Maximum Supply Pressure:
3495psi
Cylinders, Double Acting - Lift, Bore and Stroke:
120 mm × 1070 mm (4.7 in × 42.1 in)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke:
140 mm × 230 mm (5.5 in × 9.1 in)
Hydraulic System - Steering
Steering System - Circuit:
Pilot operated, load sensing
Bore:
4.5in
Stroke:
22.7in
Steering System - Pump:
Variable displacement piston
Max Flow at 1,800 rpm:
44.9gpm
Relief Valve Setting - Steering:
3481psi
Vehicle Articulation Angle:
86°
Service Refill Capacities
Cooling System:
30.6gal (US)
Engine Crankcase:
9.0gal (US)
Transmission:
17.4gal (US)
Fuel Tank:
206.6gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only):
8.5gal (US)
Differential - Final Drives - Front:
26.4gal (US)
Differential - Final Drives - Rear:
29.1gal (US)
Hydraulic Tank Only:
35.4gal (US)
Hydraulic System - Implement/Steering:
56.5gal (US)
Note (1):
All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases***: • Up to B20 biodiesel (FAME)** • Up to 100% HVO and GTL renewable fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006. * Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. ** Engines with aftertreatment devices can use up to B20. Engines with no aftertreatment devices can use higher blends, up to B100. *** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Air Conditioning System
Air Conditioning:
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes (3.15 tons).
Axles
Front:
Planetary – Fixed
Rear:
Planetary – Oscillating
Oscillation Angle:
±11°
Braking System
Parking Brake:
Drum and shoe, spring applied, hydraulic released
Brakes:
Multi-disc wet (enclosed) 4 WHL
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008):
73dB(A)
Machine Sound Power Level (ISO 6395:2008):
113dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*:
72dB(A)
Machine Sound Power Level (ISO 6395:2008)**:
110dB(A)
Note (1):
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2):
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3):
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4):
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5):
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008):
73dB(A)
Machine Sound Power Level (ISO 6395:2008):
113dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*:
72dB(A)
Machine Sound Power Level (ISO 6395:2008)**:
110dB(A)
Note (1):
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2):
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3):
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4):
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5):
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate)
Height to Top of Beacon:
14.5ft
Height - Top of Exhaust Stack:
14.2ft
Height - Top of Hood:
10.5ft
Ground Clearance - Bumper:
2.8ft
Centerline of Rear Axle to Edge of Bumper:
9.3ft
Centerline of Front Axle to Hitch:
6.1ft
Wheel Base:
12.1ft
Length - With Blade on Ground - Straight Blade:
27.6ft
Ground Clearance to Trunnion:
1.45ft
Height - Top of Cab:
13.5ft
Width Over Guardrails:
10.94ft
Ground Clearance:
1.8ft
Straight Blade
Capacity:
6.6yd³
Width Over End Bits:
177.4in
Height:
48.4in
Dig Depth:
17.6in
Ground Clearance:
41.6in
Maximum Tilt:
45.9in
Turning Radius – Outside Corner of Blade:
23.7ft
Turning Radius – Inside Corner of Blade:
10.15ft
Straight Push Plate Blade
Capacity:
6.6yd³
Width Over End Bits:
177.4in
Height:
48.4in
Dig Depth:
17.6in
Ground Clearance:
41.6in
Maximum Tilt:
45.9in
Turning Radius – Outside Corner of Blade:
23.2ft
Turning Radius – Inside Corner of Blade:
10.2in³
Semi-Universal Blade
Capacity:
10.0yd³
Width Over End Bits:
174.1in
Height:
61.1in
Dig Depth:
18.8in
Ground Clearance:
42.0in
Maximum Tilt:
44.1in
Turning Radius – Outside Corner of Blade:
23.8ft
Turning Radius – Inside Corner of Blade:
10.8ft
Universal Blade
Capacity:
10.0yd³
Width Over End Bits:
171.3in
Height:
53.1in
Dig Depth:
18.1in
Ground Clearance:
41.4in
Maximum Tilt:
44.6in
Turning Radius – Outside Corner of Blade:
23.9ft
Turning Radius – Inside Corner of Blade:
11.3ft
Coal Blade
Capacity:
21.2yd³
Width Over End Bits:
189.0in
Height:
68.7in
Dig Depth:
18.6in
Ground Clearance:
42.2in
Maximum Tilt:
48.9in
Turning Radius – Outside Corner of Blade:
24.9ft
Turning Radius – Inside Corner of Blade:
11.4ft
Extended Wear Blade
Capacity:
10.6yd³
Width Over End Bits:
171.6in
Height:
53.1in
Dig Depth:
18.1in
Ground Clearance:
41.4in
Maximum Tilt:
44.6in
Turning Radius – Outside Corner of Blade:
23.9ft
Turning Radius – Inside Corner of Blade:
11.4ft
Standard Equipment
note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
safety
- Camera, rear vision
- Alarm, back-up
- Light, warning switched (LED strobe)
- Lighting, access stairway
- Cat Detect: Object Detection (ready)
- Mirror, internal (panoramic)
- Mirrors, rearview (externally mounted)
- Seat belt with minder, retractable, 76 mm (3 in) wide
- Steering and Transmission Integrated Control (STIC™) system with lockout
- Emergency platform egress
- Stairway, left and right rear access
- Toe kicks
efficiency
- Hydraulically driven demand fan
powertrain
- Air-to-air aftercooler
- Auto shift
- Brakes, full hydraulic, enclosed, wet multiple disc service brakes
- Cat Clean Emission Module (Tier 4 Final/Stage V)
- Electro-hydraulic parking brake
- Electronic Clutch Pressure Control (ECPC)
- Engine, Cat C15 meets Tier 4 Final/Stage V emission standards, or emits equivalent to U.S. EPA Tier 3/EU Stage IIIA emission standards
- Fuel priming pump (electric)
- Fuel-to-air cooler
- Integrated braking system
- Muffler (under hood) (Tier 3/Stage IIIA)
- Radiator, Aluminum Modular (AMR)
- Separated cooling system
- Single Clutch Speed Shifting (SCSS)
- Throttle lock
- Torque converter with Lock Up Clutch (LUC)
- Transmission, planetary, with (4F/4R) speed range control
cold weather
- Starting aid (ether) automatic
- Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
electrical
- Alternator, 150 amp
- Batteries, maintenance-free (4 – 1,000 CCA)
- Electrical system, 24V
- Lighting system, halogen (front and rear)
- Lights, directional (rear)
- Starter, electric (heavy duty)
operator environment
- Radio, CB (ready)
- 12V power port for mobile phone or laptop connection
- Air conditioner
- Cab, sound-suppressed pressurized, internal four-post rollover protective structure/falling objects protective structure (ROPS/FOPS), radio ready for entertainment includes antenna, speakers, converter (12-volt 10/15-amp), and power port
- Cab door, sliding window (LH)
- Coat and hard hat hooks
- Electro-hydraulic tilt and tip controls
- Fingertip shifting controls
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Implement hydraulic lockout
- Instrumentation, gauges: – Diesel exhaust fluid (DEF) level (U.S. EPA Tier 4 Final/Stage V) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
- Cab precleaner, powered
- Light, (dome) cab
- Lunch box and beverage holders
- Seat, premium plus containing forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness adjustment, dynamic end dampening, and leather finish
- Sun visor, front
- Rubber mounted, laminated, tinted glass
- Transmission gear (indicator)
- Vital Information Management System (VIMS™): – Graphical information display – External data port – Customizable operator profiles
- Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)
other
- Guard, driveshaft
- Guards, crankcase and powertrain
- Fold-down exhaust stack for shipping
- Fuel tank, 782 L (207 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Hydraulic, engine, and transmission oil coolers
- Vandalism protection caplocks
- Venturi stack
service
- Ground level emergency engine shutdown switch
- Ground level lockable master battery disconnect switch
- Auxiliary jump start receptacle
- Doors, service access (locking)
- Ecology drains for engine, radiator, transmission, hydraulic tank
- Engine, crankcase, 500 hour interval with CJ-4 oil
- Engine precleaner
- Fire suppression ready
- Oil change system, high speed
- Oil sampling valves
- Product Link™
- Lighting underhood
- Total hydraulic filtration system
Optional Equipment
note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
operator environment
- Radio, AM/FM/AUX/USB/Bluetooth®
other
- Counterweight, front
sound
- Sound suppression
electrical
- Lighting system, LED
service
- Tire Pressure Monitoring System
- Dual stage engine precleaner
cold weather
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
- Antifreeze, –50° C (–58° F)
- Arctic hydraulic oil
- Mirrors, heated
powertrain
- No-spin rear axle
Similar Products
854 Wheel Dozer
Engine Model:
Cat® C15
Net Power - SAE J1349:2011:
405hp
Rated Speed:
1800r/min
Net Power - ISO 9249:2007:
405hp
824 Wheel Dozer
Engine Model:
Cat® C15
Net Power - SAE J1349:2011:
405hp
Rated Speed:
1800r/min
Net Power - ISO 9249:2007:
405hp
814 Wheel Dozer
Engine Model:
Cat® C15
Net Power - SAE J1349:2011:
405hp
Rated Speed:
1800r/min
Net Power - ISO 9249:2007:
405hp