Skip to content

914 Small Wheel Loader

At a glance data:

Rated Net Power - Rated Engine Speed:
2200r/min
Maximum Gross Power - Rated Engine Speed:
1800r/min
Rated Net Power - SAE J1349:
99hp
Maximum Gross Power - ISO 14396 (metric):
112hp
Cat® 914 Small Wheel Loader

Overview

The Cat® 914 Small Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Category:
Small Wheel Loaders

Brand:
Cat

Engine

Rated Net Power - Rated Engine Speed:
2200r/min
Maximum Gross Power - Rated Engine Speed:
1800r/min
Rated Net Power - SAE J1349:
99hp
Maximum Gross Power - ISO 14396 (metric):
112hp
Rated Net Power - ISO 9249:
98hp
Maximum Gross Torque - SAE J1995:
335ft·lbf
Maximum Gross Torque - ISO 14396:
332ft·lbf
Maximum Net Torque - SAE J1349:
329ft·lbf
Maximum Net Torque - ISO 9249:
327ft·lbf
Displacement:
220in³
Bore:
3.85in
Stroke:
4.72in
Engine Model:
Cat C3.6
Emissions:
Engine meets Tier 4 Final/Stage V emission standards.
Note:
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396:
110hp

Buckets

Bucket Capacities:
1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose:
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material:
2.5-3.5 m³ (3.3-4.6 yd³)

Weights

Operating Weight:
19103lb

Steering

Maximum Flow - Steering Pump:
22gpm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left:
3.75turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed:
2.8s
Maximum Working Pressure - Steering Pump:
3263psi
Steering Articulation Angle - Each Direction:
40°

Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure:
3046psi
Maximum Flow - Implement Pump:
39gpm
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard:
24gpm
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure:
3046psi
Hydraulic Cycle Time - Total Cycle Time:
12.5s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift:
5.2s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow:
24gpm
Hydraulic Cycle Time - Dump, at Maximum Reach:
1.4s
Relief Pressure - Tilt Cylinder:
4931psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High:
32gpm
Maximum Working Pressure - Implement Pump:
4061psi
Hydraulic Cycle Time - Rackback:
2.2s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level:
3.7s

Service Refill Capacities

Cooling System:
5.7gal (US)
Fuel Tank:
43.6gal (US)
Note:
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential:
2gal (US)
Hydraulic System - Including Tank:
25.9gal (US)
Diesel Exhaust Fluid (DEF) Tank:
4.8gal (US)
Engine Crankcase:
2.6gal (US)
Hydraulic Tank:
14.5gal (US)
Transmission:
0.8gal (US)
Axles - Front Center Differential:
2gal (US)

Transmission

Note:
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3:
25mile/h
Forward and Reverse - Speed Range 1*:
6.3mile/h
Forward and Reverse - Speed Range 2*:
12.5mile/h

Tires

Other Choices Include:
17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1):
Other tire choices are available. Contact your Cat dealer for details.
Standard Size:
17.5 R25 L2 XTLA
Note (3):
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2):
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Cab

ROPS:
ISO 3471:2008
FOPS:
ISO 3449:2005
Note (4):
*The measurements were conducted with the cab doors and windows closed.
Note (2):
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3):
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1):
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Axles

Rear:
Oscillating ±11 degrees; Locking differential (Standard)
Front:
Fixed; Locking differential (standard)

Sustainability

Recyclability:
95%

Engine

Maximum Gross Power:
110hp

Standard Equipment

Optional Equipment

Studio Shot

3.66 m (12 ft) Bucket Receiver Straight Snow Push With Steel Trip Edge

Rated Net Power - Rated Engine Speed:
2200r/min
Maximum Gross Power - Rated Engine Speed:
1800r/min
Rated Net Power - SAE J1349:
99hp
Maximum Gross Power - ISO 14396 (metric):
112hp
Studio Shot

3.05 m (10 ft) IT Coupler Straight Snow Push With Steel Trip Edge

Rated Net Power - Rated Engine Speed:
2200r/min
Maximum Gross Power - Rated Engine Speed:
1800r/min
Rated Net Power - SAE J1349:
99hp
Maximum Gross Power - ISO 14396 (metric):
112hp
Studio Shot

3.66 m (12 ft) IT Coupler Straight Snow Push With Steel Trip Edge

Rated Net Power - Rated Engine Speed:
2200r/min
Maximum Gross Power - Rated Engine Speed:
1800r/min
Rated Net Power - SAE J1349:
99hp
Maximum Gross Power - ISO 14396 (metric):
112hp
Studio Shot

3.05 m (10 ft) Bucket Receiver Straight Snow Push With Steel Trip Edge

Rated Net Power - Rated Engine Speed:
2200r/min
Maximum Gross Power - Rated Engine Speed:
1800r/min
Rated Net Power - SAE J1349:
99hp
Maximum Gross Power - ISO 14396 (metric):
112hp
Studio Shot

3.66 m (12 ft) Fusion™ Coupler Straight Snow Push With Steel Trip Edge

Rated Net Power - Rated Engine Speed:
2200r/min
Maximum Gross Power - Rated Engine Speed:
1800r/min
Rated Net Power - SAE J1349:
99hp
Maximum Gross Power - ISO 14396 (metric):
112hp
Studio Shot

3.66 m (12 ft) IT Coupler Straight Snow Push With Rubber Trip Edge

Rated Net Power - Rated Engine Speed:
2200r/min
Maximum Gross Power - Rated Engine Speed:
1800r/min
Rated Net Power - SAE J1349:
99hp
Maximum Gross Power - ISO 14396 (metric):
112hp
Studio Shot

3.05 m (10 ft) IT Coupler Straight Snow Push With Rubber Trip Edge

Rated Net Power - Rated Engine Speed:
2200r/min
Maximum Gross Power - Rated Engine Speed:
1800r/min
Rated Net Power - SAE J1349:
99hp
Maximum Gross Power - ISO 14396 (metric):
112hp
Studio Shot

3.66 m (12 ft) Bucket Receiver Straight Snow Push With Rubber Trip Edge

Rated Net Power - Rated Engine Speed:
2200r/min
Maximum Gross Power - Rated Engine Speed:
1800r/min
Rated Net Power - SAE J1349:
99hp
Maximum Gross Power - ISO 14396 (metric):
112hp
Studio Shot

3.05 m (10 ft) Bucket Receiver Straight Snow Push With Rubber Trip Edge

Rated Net Power - Rated Engine Speed:
2200r/min
Maximum Gross Power - Rated Engine Speed:
1800r/min
Rated Net Power - SAE J1349:
99hp
Maximum Gross Power - ISO 14396 (metric):
112hp