BLAZE 400D TURBO
At a Glance
With features like 5,500 CFM, ductable to 150 feet with a full load power consumption of a mere 8.5 amps, it’s not surprising why the Blaze 400D Turbo boasts the highest performance level in its class. Capable of 3″ of static pressure, it comes equipped with Whisper Quiet Operation, 220° F Heat Rise and Air Recirculating Capabilities.
Designed to meet the particular needs of the rental market, the low amp draw (8.5 A) and high static capabilities makes the Turbo adaptable to unpredictable environments. The sleek and compact design (76.7” x 31” x 57.6”) combines efficiency with high performance making the 400 Turbos adaptable to various heating and drying applications. Rental rugged and designed for durability, each unit comes equipped with a lifting bar and forklift pockets as well as optional foam filled tires and QC’s for external tank hook up.
We continue to listen and innovate, one of the greatest challenges for portable heaters is power and power quality. Overloaded temporary power systems on job sites, undersized or overly long extension cords all make for problems. Our answer: the latest generation Turbo heaters, while we don’t recommend running your heaters on low voltage, check out the attached video – our heater doesn’t cut out until just under 70 volts and the whole time our amperage does not spike above ten amps!
Kinked ducting or too much ducting can also create havoc on your heater and result in increased service calls. The latest generation of 400/600K BTU Turbo heaters are able to be ducted up to 150ft, therefore reducing the amount of service related calls due to overheating.
Ground Breaking Features:
- Recirculating Capabilities
- Input BTU/h: 280,000 to 396,000
- 5,500 CFM – highest in its class
- Ductability: 150ft
- Indirect Oil Fired
- Beckett Burner (4 Firing Rates)
- 220°F + Heat Rise
- Fuel Tank: 42/70 US Gallons (Optional 100 US Gallon Skid tank available)
- Optional 120% Spill Containment Package
- Whisper Quiet Operation
- Running Time: Up to 21 hrs. (Low Fire)
- Thermostat Operation
- Genysis Primary Controller
- Redundant Fail Safe Control System
- Digital Panel Mounted Voltmeter
- Oil Pressure Gauge, Spin-off Filter
- Lifting Bar & Forklift Pockets
- Weight: 600 lbs.
- Dimensions: 76.7” x 31” x 57.6”
- Full Load Amps: 8.5 A
- Air Outlets: Two 12” or 1 x 16”
- Inlets: Two 12” or 1 x 16”
- Stainless Steel Heat Exchanger
CSA/UL * Certified to CSA/UL standards by OMNI
|Duct Runs (max)||150 ft.|
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.