3606 Generator Set (Medium Speed)
At a Glance
Maximum Rating
2688 kVA
|
Minimum Rating
1775 kVA
|
Emissions/Fuel Strategy
Low Fuel Consumption
|
Frequency
50 Hz
|
Request a Quote
Overview
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Generator Set Specifications
+
-
Maximum Rating |
2688 kVA |
Minimum Rating |
1775 kVA |
Emissions/Fuel Strategy |
Low Fuel Consumption |
Frequency |
50 Hz |
Speed |
750 & 1000 rpm |
Duty Cycle |
Continuous |
Engine Specifications
+
-
Engine Model |
3606 I-6, 4-Stroke Water-Cooled Diesel |
Bore |
11in |
Stroke |
11.8in |
Displacement |
6762in³ |
Compression Ratio |
13:01 |
Aspiration |
TA |
Fuel System |
Direct unit injection |
Governor Type |
Generator Set Monitoring System (GMS) |
Generator Set Dimensions
+
-
Length - Maximum |
404in |
Width - Maximum |
99.62in |
Height - Maximum |
156.6in |
Dry Weight - Genset (maximum) |
74970lb |
Standard Equipment:
Air Inlet System
+
-
-
Breather, crankcase, top-mounted
-
Air inlet shutoff
-
Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
-
Aftercooler, fresh water, corrosion resistant coated (air side)
Cooling System
+
-
-
Water temperature regulator
-
Engine coolant water drains
-
Jacket water thermostats
Exhaust System
+
-
-
457 mm (18 in) Cat bolt pattern
-
Dry, gas tight, exhaust manifold
-
Includes adapter, flexible exhaust fitting
Generator System
+
-
-
Custom generator per generator data sheet completed by dealer
Lube System
+
-
-
Oil pressure regulating valve
-
Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
-
Oil filler and dipstick
-
Crankcase explosion relief valves
-
Service side engine mounted on cylinder block inspection covers
-
Centrifugal oil filters with single shutoff
Mounting System
+
-
-
Damper, torsional vibration
-
Engine and generator mounting
Starting / Charging System
+
-
-
One motor, engine mounted at rear, on left side
-
Vane type air starter
-
Air silencer
-
Line group for single point custom connection
General:
+
-
-
Paint, Caterpillar yellow
-
Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
Optional Equipment:
Air Inlet System
+
-
Boost control valve
Soot filter
Heavy duty air cleaner
Air inlet adapter
Vertical support bracket
Air cleaner louver assembly
Air cleaner
Cooling System
+
-
Expansion tank
Auxiliary water pump
Cooling system aids
Heating aids
Exhaust System
+
-
Weld flange and related hardware
Flexible exhaust fittings
Fuel System
+
-
Fuel system connections
Duplex primary fuel strainer
Fuel priming pump
Generator System
+
-
Class F insulation
3 Phase, six Leads, WYE
Anti-condensation space heaters
Winding temperature detectors
Busbar connections
Governor System
+
-
Electronic/actuators
Digital programmers
2301 A load share
EGB actuator
Battery backup/power supply
723 Plus
Lube System
+
-
Oil pan drain valve
Lube ANSI adapter (Emergency connection)
Mounting System
+
-
Non-vertically restrained
Spring type vibration isolators
Vertically restrained
Isolator
Starting / Charging System
+
-
Compressed air flex hose
Pressure reducing valve