D9 Dozer
360° Exterior View
360° Interior View
At a Glance
|
|
|
|
Overview
Nearly half of the large dozers Caterpillar sells are D9 dozers—and for good reason. They’re the smart choice for dozens of applications and environments thanks to unmatched reliability, long life and a wide range of application-specific blades.
Like all Cat® dozers, the productive and efficient D9 is a fully integrated Cat machine—100% designed by Caterpillar and built with all Cat components that work together to deliver top performance and high availability. With the D9, you’ll move more dirt at the lowest possible cost.
Engine - U.S. EPA Tier 2/3 Equivalent
+ -Engine Model | Cat® C18 |
Engine Power - Net SAE J1349/ISO 9249 | 452HP |
Bore | 5.7in³ |
Stroke | 7.2in |
Displacement | 1106in³ |
Engine Power - Gross SAE J1995 | 487HP |
Engine Power - ISO 14396 | 479HP |
Emissions | U.S. EPA Tier 2 or Tier 3 equivalent |
Note (1) | All engine ratings apply at 1,750 rpm. |
Note (2) | No derating required up to 4267 m (14,000 ft) altitude. |
Weights
+ -Operating Weight | 110225lb |
Shipping Weight | 84373lb |
Note (1) | D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. |
Note (2) | D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. |
Undercarriage
+ -Shoe Type | Extreme Service |
Width - Shoe | 24in |
Shoes/Side | 43 |
Grouser Height | 3.3in |
Pitch | 9.4in |
Ground Clearance | 18.1in |
Track Gauge | 88.6in |
Length - Track on Ground | 136.6in |
Ground Contact Area | 45.6ft² |
Track Rollers/Side | 8 |
Number of Carrier Rollers | 1 per side (optional) |
Standards
+ -ROPS | Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. |
FOPS | Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. |
Sound | The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling |
Sound (1) | The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c |
Sound (2) | Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. |
Steering and Brakes
+ -Steering Type | Differential |
Brake Type | Spring Applied Wet Disc |
Brake Diameter | 15.5in |
Brake Count | 8 |
Engine - U.S. EPA Tier 4 Final/EU Stage V
+ -Engine Model | Cat® C18 |
Bore | 5.7in³ |
Stroke | 7.2in³ |
Displacement | 1106in³ |
Engine Power - Gross SAE J1995 | 477HP |
Engine Power - ISO 14396 | 468HP |
Engine Power - Net SAE J1349/ISO 9249 | 440HP |
Emissions | U.S. EPA Tier 4 / EU Stage V |
Note (1) | All Engine ratings apply at 1,750 rpm. |
Note (2) | No derating required up to 2499 m (8,200 ft). |
FLUID CAPACITIES
+ -Fuel Tank (Splash Fill) | 254gal (US) |
DEF Tank (Tier 4 only) | 9.5gal (US) |
Fuel Tank (Fast Fill) | 248gal (US) |
Cooling System | 21gal (US) |
Engine Crankcase* | 10gal (US) |
Powertrain | 40gal (US) |
Final Drives (each) | 4gal (US) |
Roller Frames (each) | 12gal (US) |
Pivot Shaft Oil | 8gal (US) |
Hydraulic System Tank | 24gal (US) |
Note | *With oil filters. |
Note 2 | Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or |
Note 3 | All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. |
Note 4 | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
Hydraulic Controls
+ -Pump Type | Piston-type geared to flywheel |
Pump Output - Steering | 96gal/min |
Fan Pump | 21gal/min |
Tilt Cylinder Flow - Rod End Flow | 53gal/min |
Tilt Cylinder Flow - Head End Flow | 53gal/min |
Lift Cylinder Relief Valve Setting | 3800lbf/in |
Tilt Cylinder Relief Valve Setting | 2799psi |
Ripper - Lift - Relief Valve Setting | 3800psi |
Ripper - Pitch - Relief Valve Setting | 3800psi |
Steering System - Pressure | 5874psi |
Tank Capacity | 24gal/min |
Note (1) | Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). |
Note (2) | Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). |
Note (3) | Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) |
Air Conditioning System
+ -Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. |
Transmission
+ -1.0 Forward | 2.2mile/h |
2.0 Forward | 3.9mile/h |
3.0 Forward | 6.8mile/h |
1.0 Reverse | 2.7mile/h |
2.0 Reverse | 4.8mile/h |
3.0 Reverse | 8.4mile/h |
Type | Planetary powershift |
Blade - Semi-Universal
+ -Blade Capacity (SAE J1265) | 17.8yd³ |
Blade Width (over end bits) | 171.3in |
Blade Height | 76.1in |
Maximum Digging Depth | 23.9in |
Ground Clearance at Full Lift | 56in |
Maximum Tilt | 37in |
Blade Weight | 10587lb |
Total Operating Weight* (with blade and single-shank ripper) | 110205lb |
Note | * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
Blade - Universal
+ -Blade Capacity (SAE J1265) | 21.7yd³ |
Blade Width (over end bits) | 184.3in |
Blade Height | 76.1in |
Maximum Digging Depth | 23.9in |
Ground Clearance at Full Lift | 56in |
Maximum Tilt | 39.9in |
Blade Weight | 12016lb |
Total Operating Weight* (with blade and single-shank ripper) | 111362lb |
Note | *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
Ripper - Single Shank
+ -Maximum penetration force * (shank vertical) | 35520lbf |
Maximum penetration depth (standard tip) | 48.5in |
Pryout Force | 74637lbf |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 34.7in |
Number of Pockets | 1 |
Weight | 10701lb |
Total Operating Weight* (with SU Blade and noted ripper) | 110205lb |
Note | *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
Ripper - Single Shank, Deep Ripping
+ -Maximum penetration force * (shank vertical) | 38667lbf |
Maximum penetration depth (standard tip) | 68in |
Pryout Force | 74412lbf |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 32.2in |
Number of Pockets | 1 |
Weight | 10981lb |
Total Operating Weight* (with SU Blade and noted ripper) | 110485lb |
Note | *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
Ripper - Multi-Shank, Adjustable Parallelogram
+ -Maximum Penetration Force - Shank Vertical | 34621lbf |
Maximum Penetration - Standard Tip | 31.4in |
Pry-Out Force - Multi-Shank Ripper with One Tooth | 81156lbf |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 34.6in |
Number of Pockets | 3 |
Weight | 12136lb |
Total Operating Weight* - With SU-Blade and Ripper | 111739lb |
Note | * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
Dimensions (Approximate)
+ -Ground Clearance* | 18.1in |
Track Gauge | 88.6in |
Width - Without Trunnions - Standard Shoe | 113in |
Width - Over Trunnions | 130.3in |
Height - FOPS Cab* | 150.4in |
Height - Top of Stack* | 152.6in |
Height - ROPS/Canopy* | 157.5in |
Drawbar Height (Center of Clevis)* | 30in |
Length - Track on Ground | 136.6in |
Overall Length - Basic Tractor | 193.3in |
Length - Basic Tractor - With Drawbar | 206.4in |
Length - Basic Tractor - With Winch | 218.3in |
Length - With SU-Blade** | 259.9in |
Length - With U-Blade | 274.3in |
Length - With Single-Shank Ripper | 257in |
Length - With Multi-Shank Ripper | 257.4in |
Overall Length - SU-Blade/SS Ripper | 323.6in |
Note (1) | *Includes grouser height for total dimensions on hard surfaces. |
Winches
+ -Winch Model | PA 140VS |
Weight* | 3950lb |
Oil Capacity | 4gal (US) |
Drum Width | 12.6in |
Wire Cable Diameter - Recommended | 1.13in |
Wire Cable Diameter - Optional | 1.25ft |
Maximum Drum Capacity - Recommended Cable Length | 257in |
Maximum Drum Capacity - Optional Cable Length | 204ft |
Wire Cable Ferrule Size - Outside Diameter | 2.4in |
Wire Cable Ferrule Size - Length | 2.8in |
Note | *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). |
Note (2) | Variable speed, hydraulically driven, dual braking system, three-roller fairlead. |
Standard Equipment:
Operator Environment
+ --
ROPS/FOPS, Sound-Suppressed Cab
-
High-Definition Primary Touchscreen Display
-
Visibility – Rearview Mirrors
-
Air Conditioner and Heater with Automatic Climate Control
-
Seatbelt, 76 mm (3 in) Retractable with Switch
-
Seat — Cloth with Air Suspension
-
Window Wipers with Wash — Low, High, Intermittent
-
Differential Steering — Power Turn
-
Entertainment Radio Ready (12V Power, Harness, Speakers)
-
Cab Glass — Single-Pane Tinted Safety
-
Cab Door — Right-Hand Swing
-
Access/Egress Lighting with Shutdown Timer
-
"Operator Not Present" Detection
-
Armrest — Adjustable
-
Interior LED Courtesy Lights
-
Interior Backlighting — Dimmable
-
Air Conditioning Condenser — Cab Mounted (Standard only on Tier 4 engine arrangements. Optional on Tier 2/3 versions. Tier 2/3 versions have underhood A/C condenser standard.)
-
Decelerator Pedal
-
Controls — Blade — Electronic
-
Controls — Ripper — Electronic
-
Park Brake — Electronic
-
Engine Speed Control Dial
-
Cab Access — Blade Pusharm Steps and Grab Handle
-
Fender Platform Guardrails
-
Site Communication Radio Mount
-
Four Fluids (Engine Oil, Coolant, Power Train, Fuel)
-
Continuous Fluid Level Monitoring — Four Fluids (Engine Oil, Power Train, Coolant, Fuel)
-
Slope and Side Slope Monitor
Technology
+ --
VIMS™
-
Automated Blade Assist (ABA) — When Equipped with Dual Tilt
-
Cat Product Link Elite (Cellular) (Where Allowed by Local Regulations)
Power Train
+ --
Aftercooler, air-to-air
-
Air filter, with precleaner
-
Aluminum bar plate radiator, 6 fpi
-
C18 Tier 4 Final and Stage IV: – 24-volt electric start – Clean Emissions Module
-
Coolant, extended life
-
Shift management: - Advanced Productivity Electronic Control System (APECS) - Enhanced AutoShift (EAS)
-
Engine idle shutdown timer
-
Ether starting aid, automatic
-
Fast fuel system
-
Fuel priming pump, key-on, electric
-
High speed oil change system, engine and power train
-
Muffler
-
Parking brake, electronic
-
Prescreener
-
Separator, water/fuel
-
Three planet, double-reduction planetary final drives
-
Torque converter
-
Transmission, electronic control (ECPC), (3F/3R speeds)
Fluids
+ --
Coolant — Extended Life, Standard (— 37° C / — 25° F)
Undercarriage
+ --
Suspension-Type Undercarriage
-
Track Guide
-
Two-Piece Master Link
-
Lifetime-Lubricated Rollers and Idlers
-
Hydraulic Track Adjusters
-
Equalizer Bar — Greased End Pin Bearings
Hydraulics
+ --
Electronically Controlled, Load-Sensing Dozer Lift and Tilt
-
Electronically Controlled, Load-Sensing Ripper Lift and Pitch
-
Electronically Enabled Blade, Quick Drop
Electrical
+ --
Alternator — 150-Amp
-
Batteries — 2 x 4, 200-Amp Hour, 12V
-
12V, 15-Amp Converter
-
Battery Isolation
-
Backup Alarm
-
Lights, Engine Compartment
-
Lights — Halogen — 8 Positions
Service And Maintenance
+ --
Ecology Fluid Drains — All Compartments
-
Hinged Bottom Guards
-
High-Speed Oil Change — Engine and Transmission
-
SOS℠ Fluid Sampling Ports
-
Diagnostic Connector
-
CapSureTM Hammerless Ripper Tip and Shank Protectors
-
Anchorage Points (10)
Optional Equipment:
Operator Environment
+ -Visibility – Camera – Ripper Tip View
Visibility — Dual Camera
Visibility — Four Cameras — 360-Degree View
Seat — Heated, Cooled, Adjustable Lumbar and Bolsters
Entertainment Radio — AM/FM, Aux Input and Bluetooth®
Cab Glass — Dual-Pane Laminated Impact Safety
Cab Glass — High-Pressure Safety (40 psi/275 kPa)
Window Sunscreen
Small Operator 5th Percentile Mounting Group
Cab Door — Left-Hand Swing
Cab Access — Powered Ladder
Cab Filter Powered Precleaner
Technology
+ -AutoCarry™
Auto Ripper Control
Cat Product Link Elite Dual Mode (Cellular + Satellite)
Cat GRADE with 3D
Power Train
+ -Coolant, arctic
Engine prelube
Exhaust, wrapped: – Insolated Clean Emissions Module
Final drives: – Cold weather – Guarded – Waste handling
Ground level DEF fill
Reversible cooling fan
Fluids
+ -Coolant — Extended Life, Arctic (— 51° C / — 60° F)
High Ambient Lubrication Package
Arctic Lubrication Package
Undercarriage
+ -Undercarriage Arrangement — Abrasion
Undercarriage Arrangement — Waste Handling
Undercarriage Arrangement — Cold Weather
Front Striker Bars
Rubber Idler Guards
Track Links — Heavy Duty XL — DuraLink
Track Shoe — Anti-Packing Round Hole Carrier Roller
Carrier Roller
Carrier Roller — Cold Weather
Hydraulics
+ -Dozer Blade Dual Tilt
Ripper Pin Puller
Guarded Tilt Cylinder Lines
Electrical
+ -24V Electric Start, Dual Starters
Batteries — 4 x 200, 200-Amp Hour, 12V
Lights — Halogen — 12 Positions
Lights — LED — 14 Positions
Lights — High-Output LED — 14 Positions
Light — Warning Strobe
Service And Maintenance
+ -Sound-Reduction Sealed Bottom Guards
Ground-Level Fast Fuel Fill (Standard on Tier 4)
Sound Enclosure
Cat Autolube Grease System with Ground-Level Fill and Auto Shutoff
Hinged Quick-Access Door on Radiator Guard
Rear Attachments
+ -Ripper Ready
Winch Ready
Ripper — Single Shank
Ripper — Single-Shank Deep
Ripper — Multi Shank (three shank)
Counterweight
Striker Box (Waste)
Winch
Drawbar
Blades
+ -Semi-Universal (13.6 m3/17.8 yd3)
Semi-Universal Abrasion (13.6 m3/17.8 yd3)
Universal (16.6 m3/21.7 yd3)
Universal Abrasion (16.6 m3/21.7 yd3)
Semi-Universal Push Plate (13.6 m3/17.8 yd3)
SU Landfill (28.2 m3/36.8 yd3)
Universal Landfill (38.8 m3/50.8 yd3)
Woodchip (46.1 m3/60.3 yd3)
Coal (36.8 m3/48.2 yd3)
— Some blades only available through Cat Work Tools.
— SU Abrasion and U Abrasion are available with black paint on back side.
Other
+ -Fire Suppression Ready
Special Arrangements
+ -High Debris
Stockpile
Waste Handling
Sound
Arctic