Menu
View Details

Tap to Call

854 Wheel Dozer

854 Wheel Dozer

At a Glance

Engine Model
Cat C32B
Gross Power
907 HP
Operating Weight
224647 lb
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995
900 HP
Request a Demo Machine Comparison

Overview

Engine

+ -
Engine Model Cat C32B
Gross Power 907HP
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 900HP
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 814HP
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 907HP
Emissions (Tier 2 Equivalent): Net Power ISO - 9249 823HP
Rated Speed 1750r/min
Bore 5.7in
Stroke 6.4in
Displacement 1958in²
Peak Torque - 1,200 rpm 3139lb/ft
Torque Rise 30%
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2) Net torque rise meets SAE J139.
Note (3) No engine derating required up to 3050 m (10,000 ft) altitude.

Weights

+ -
Operating Weight 224647lb

Transmission

+ -
Transmission Type Cat Planetary Power Shift
Converter Drive - Forward 1 4.4mile/h
Converter Drive - Forward 2 7.7mile/h
Converter Drive - Forward 3 13.2mile/h
Converter Drive - Reverse 1 4.8mile/h
Converter Drive - Reverse 2 8.4mile/h
Converter Drive - Reverse 3 14.6mile/h
Direct Drive - Forward 1 Lock-up disabled
Direct Drive - Forward 2 8.1mile/h
Direct Drive - Forward 3 14.2mile/h
Direct Drive - Reverse 1 5mile/h
Direct Drive - Reverse 2 8.9mile/h
Direct Drive - Reverse 3 15.6mile/h
Note Travel speeds based on 45/65-45 L-5 46 ply tires.

Hydraulic System - Lift/Tilt

+ -
Output at 1,850 rpm and 6900 kPa (1,000 psi) 161gal/min
Cylinders, Double Acting - Lift, Bore and Stroke 177 mm × 1760 mm (0.58 ft × 5.8 ft)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke 267 mm × 286 mm (0.88 ft × 0.94 ft)

Service Refill Capacities

+ -
Fuel Tank - Standard 413gal (US)
Cooling System 53gal (US)
Crankcase 32gal (US)
Transmission 45gal (US)
Differential - Final Drives - Front 98gal (US)
Differential - Final Drives - Rear 90gal (US)
Hydraulic System - Steering and Engine Cooling Fan - Tank Only 77gal (US)
Note (1) - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo

Axles

+ -
Front Fixed
Rear Trunnion

Brakes

+ -
Brakes Meets ISO 3540:2011

Blades

+ -
Blade Capacities 30.5 to 44.8 m3 (40 to 58.6 yd3)

Dimensions (Approximate)

+ -
Height - Top of ROPS 18.25ft
Height - Top of Exhaust Pipe 17.17ft
Height - Top of Hood 13ft
Ground Clearance 27in
Centerline of Front Axle to Hitch 9.67ft
Centerline of Rear Axle to Edge of Bumper 13.75ft
Wheel Base 19.25ft
Length - With Blade on Ground 44ft

Hydraulic System - Steering

+ -
Steering System - Pump Piston, variable displacement
Minimum Turning Radius - Over Blade 31ft
Steering System - Circuit Pilot, load sensing
Total Steering Angle 86 degrees
Relief Valve Setting 5004psi

Operating Specifications

+ -
Operating Weight 224647lb

Sound Performance Levels

+ -
Sound Performance • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was

Air Conditioning System

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Cab

+ -
ROPS/FOPS ISO 3471:2008 and ISO 3449:2005 Level II Standards