Menu
View Details

Tap to Call

D9 Dozer

D9 Dozer

At a Glance

Engine Model
Cat® C18
Engine Power - Net SAE J1349/ISO 9249
452 HP
Operating Weight
110225 lb
Shipping Weight
84373 lb
Request a Demo Machine Comparison

Overview

Engine - U.S. EPA Tier 2/3 Equivalent

+ -
Engine Model Cat® C18
Engine Power - Net SAE J1349/ISO 9249 452HP
Bore 5.7in³
Stroke 7.2in
Displacement 1106in³
Engine Power - Gross SAE J1995 487HP
Engine Power - ISO 14396 479HP
Emissions U.S. EPA Tier 2 or Tier 3 equivalent
Note (1) All engine ratings apply at 1,750 rpm.
Note (2) No derating required up to 4570 m (15,000 ft) altitude.

Weights

+ -
Operating Weight 110225lb
Shipping Weight 84373lb
Note (1) D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
Note (2) D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.

Undercarriage

+ -
Shoe Type Extreme Service
Width - Shoe 24in
Shoes/Side 43
Grouser Height 3.3in
Pitch 9.4in
Ground Clearance 18.1in
Track Gauge 88.6in
Length - Track on Ground 136.6in
Ground Contact Area 45.6ft²
Track Rollers/Side 8
Number of Carrier Rollers 1 per side (optional)

Standards

+ -
ROPS Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
FOPS Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
Sound The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machineis 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
Sound (1) The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
Sound (2) Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.

Steering and Brakes

+ -
Steering Type Differential
Brake Type Spring Applied Wet Disc
Brake Diameter 15.5in
Brake Count 8

Engine - U.S. EPA Tier 4 Final/EU Stage V

+ -
Engine Model Cat® C18
Bore 5.7in³
Stroke 7.2in³
Displacement 1106in³
Engine Power - Gross SAE J1995 477HP
Engine Power - ISO 14396 468HP
Engine Power - Net SAE J1349/ISO 9249 440HP
Emissions U.S. EPA Tier 4 / EU Stage V
Note (1) All Engine ratings apply at 1,750 rpm.
Note (2) No derating required up to 3658 m (12,000 ft) altitude.

FLUID CAPACITIES

+ -
Fuel Tank (Splash Fill) 254gal (US)
DEF Tank (Tier 4 only) 9.5gal (US)
Fuel Tank (Fast Fill) 248gal (US)
Cooling System 21gal (US)
Engine Crankcase* 10gal (US)
Powertrain 40gal (US)
Final Drives (each) 4gal (US)
Roller Frames (each) 12gal (US)
Pivot Shaft Oil 8gal (US)
Hydraulic System Tank 24gal (US)
Note *With oil filters.
Note 2 Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
Note 3 All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
Note 4 Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Hydraulic Controls

+ -
Pump Type Piston-type geared to flywheel
Pump Output - Steering 96gal/min
Fan Pump 21gal/min
Tilt Cylinder Flow - Rod End Flow 53gal/min
Tilt Cylinder Flow - Head End Flow 53gal/min
Lift Cylinder Relief Valve Setting 3800lbf/in
Tilt Cylinder Relief Valve Setting 2799psi
Ripper - Lift - Relief Valve Setting 3800psi
Ripper - Pitch - Relief Valve Setting 3800psi
Steering System - Pressure 5874psi
Tank Capacity 24gal/min
Note (1) Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
Note (2) Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
Note (3) Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)

Air Conditioning System

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.

Transmission

+ -
1.0 Forward 2.2mile/h
2.0 Forward 3.9mile/h
3.0 Forward 6.8mile/h
1.0 Reverse 2.7mile/h
2.0 Reverse 4.8mile/h
3.0 Reverse 8.4mile/h
Type Planetary powershift

Blade - Semi-Universal

+ -
Blade Capacity (SAE J1265) 17.8yd³
Blade Width (over end bits) 171.3in
Blade Height 76.1in
Maximum Digging Depth 23.9in
Ground Clearance at Full Lift 56in
Maximum Tilt 37in
Blade Weight 10587lb
Total Operating Weight* (with blade and single-shank ripper) 110205lb
Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

Blade - Universal

+ -
Blade Capacity (SAE J1265) 21.7yd³
Blade Width (over end bits) 184.3in
Blade Height 76.1in
Maximum Digging Depth 23.9in
Ground Clearance at Full Lift 56in
Maximum Tilt 39.9in
Blade Weight 12016lb
Total Operating Weight* (with blade and single-shank ripper) 111362lb
Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

Ripper - Single Shank

+ -
Maximum penetration force * (shank vertical) 35520lbf
Maximum penetration depth (standard tip) 48.5in
Pryout Force 74637lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.7in
Number of Pockets 1
Weight 10701lb
Total Operating Weight* (with SU Blade and noted ripper) 110205lb
Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

Ripper - Single Shank, Deep Ripping

+ -
Maximum penetration force * (shank vertical) 38667lbf
Maximum penetration depth (standard tip) 68in
Pryout Force 74412lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 32.2in
Number of Pockets 1
Weight 10981lb
Total Operating Weight* (with SU Blade and noted ripper) 110485lb
Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

Ripper - Multi-Shank, Adjustable Parallelogram

+ -
Maximum Penetration Force - Shank Vertical 34621lbf
Maximum Penetration - Standard Tip 31.4in
Pry-Out Force - Multi-Shank Ripper with One Tooth 81156lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.6in
Number of Pockets 3
Weight 12136lb
Total Operating Weight* - With SU-Blade and Ripper 111739lb
Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

Dimensions (Approximate)

+ -
Ground Clearance* 18.1in
Track Gauge 88.6in
Width - Without Trunnions - Standard Shoe 113in
Width - Over Trunnions 130.3in
Height - FOPS Cab* 150.4in
Height - Top of Stack* 152.6in
Height - ROPS/Canopy* 157.5in
Drawbar Height (Center of Clevis)* 30in
Length - Track on Ground 136.6in
Overall Length - Basic Tractor 193.3in
Length - Basic Tractor - With Drawbar 206.4in
Length - Basic Tractor - With Winch 218.3in
Length - With SU-Blade** 259.9in
Length - With U-Blade 274.3in
Length - With Single-Shank Ripper 257in
Length - With Multi-Shank Ripper 257.4in
Overall Length - SU-Blade/SS Ripper 323.6in
Note (1) *Includes grouser height for total dimensions on hard surfaces.

Winches

+ -
Winch Model PA 140VS
Weight* 3950lb
Oil Capacity 4gal (US)
Drum Width 12.6in
Wire Cable Diameter - Recommended 1.13in
Wire Cable Diameter - Optional 1.25ft
Maximum Drum Capacity - Recommended Cable Length 257in
Maximum Drum Capacity - Optional Cable Length 204ft
Wire Cable Ferrule Size - Outside Diameter 2.4in
Wire Cable Ferrule Size - Length 2.8in
Note *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note (2) Variable speed, hydraulically driven, dual braking system, three-roller fairlead.