Menu
x
View Details

Tap to Call Find a Sales Rep

966M XE Wheel Loader | Front Loader

966M XE Wheel Loader | Front Loader

At a Glance

Emissions
Tier 4/Stage IV
Operating Weight
51176 lb
Bucket Capacities
3.20-7.40 m³ (4.19-9.68 yd³)
Maximum Net Torque - 1,200 rpm
1193 ft·lbf
Request a Demo Machine Comparison

Overview

The new 966M XE Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. The XE technology improves fuel efficiency by up to 25% over the M Series standard configuration and up to 35% over the K Series standard configuration.** Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards. **Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.

Engine - Tier 4 Final/Stage IV

+ -
Emissions Tier 4/Stage IV

Weights

+ -
Operating Weight 51176lb
Note Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering,

Buckets

+ -
Bucket Capacities 3.20-7.40 m³ (4.19-9.68 yd³)

Engine

+ -
Maximum Net Torque - 1,200 rpm 1193ft·lbf
Net Power - ISO 9249 298HP
Engine Model Cat C9.3 ACERT
Maximum Net Power - 1,600 rpm - ISO 9249 298HP
Maximum Net Power - 1,600 rpm - ISO 9249 - Metric 302HP
Maximum Net Power - 1,600 rpm - SAE J1349 298HP
Maximum Net Power - 1,600 rpm - SAE J1349 - Metric 302HP
Peak Gross Torque - 1,200 rpm - SAE J1995 1275ft·lbf
Peak Gross Torque - 1,200 rpm - ISO 14396 1260ft·lbf
Displacement 568in³
Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

Hydraulic System

+ -
Implement Pump Type Variable Displacement Piston
Implement System - Maximum Operating Pressure 4496psi
Implement System - Maximum Pump Output at 1,600 rpm 102gal/min
Hydraulic Cycle Time - Total 10.1s

Transmission - Virtual Gears

+ -
Reverse - 1 4.1mile/h
Reverse - 2 7.7mile/h
Reverse - 3 17.1mile/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
Forward - 1 4.1mile/h
Forward - 2 7.7mile/h
Forward - 3 13.5mile/h
Forward - 4 24.5mile/h

Sound

+ -
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 67dB(A)
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 105 LWA***
Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2) **For machines in European Union countries and in countries that adopt the ?EU Directives.?
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 67dB(A)
Note (3) ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 107dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 76 dB(A)*

Dimensions - Standard Lift

+ -
Height - Top of Hood 9.25ft
Height - Top of Exhaust Pipe 11.58ft
Height - Top of ROPS 11.75ft
Ground Clearance 1.42ft
Centerline of Rear Axle to Edge of Counterweight 7.17ft
Centerline of Rear Axle to Hitch 5.83ft
Wheel Base 11.67ft
Overall Length - Without Bucket 23.92ft
Hinge Pin Height at Maximum Lift 13.92ft
Hinge Pin Height at Carry 2.08ft
Lift Arm Clearance at Maximum Lift 11.92ft
Rack Back - Maximum Lift 62 degrees
Rack Back - Carry Height 50 degrees
Rack Back at Ground 42 degrees
Maximum Width over Tires 9.83ft
Tread Width 7.33ft
Note All dimensions are approximate and based on L3 XHA2 tires.

Dimensions - High Lift

+ -
Height - Top of Hood 9.25ft
Height - Top of Exhaust Pipe 11.58ft
Height - Top of ROPS 11.75ft
Ground Clearance 1.42ft
Centerline of Rear Axle to Edge of Counterweight 8.17ft
Centerline of Rear Axle to Hitch 5.83ft
Wheel Base 11.67ft
Overall Length - Without Bucket 26.58ft
Hinge Pin Height at Maximum Lift 15.75ft
Hinge Pin Height at Carry 2.58ft
Lift Arm Clearance at Maximum Lift 13.58ft
Rack Back - Maximum Lift 71 degrees
Rack Back - Carry Height 49 degrees
Rack Back at Ground 39 degrees
Maximum Width over Tires 9.83ft
Tread Width 7.33ft
Note All dimensions are approximate and based on L3 XHA2 tires.

Service Refill Capacities

+ -
Cooling System 19gal (US)
Crankcase 6.5gal (US)
Transmission 16.6gal (US)
Hydraulic Tank 33gal (US)
Differential - Final Drives - Front 15.1gal (US)
Differential - Final Drives - Rear 15.1gal (US)
Fuel Tank 79.8gal (US)
DEF Tank 4.4gal (US)

Operating Specifications

+ -
Breakout Force 38984lbf
Static Tipping Load - Full 37° Turn - No Tire Deflection 34873lb
Static Tipping Load - Full 37° Turn - With Tire Deflection 32329lb
Note (1) For a machine configuration as defined under ?Weight.?
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Bucket Capacities

+ -
Bucket Capacities 3.20-7.40 m3 (4.19-9.68 yd3)