Menu
View Details

Tap to Call

986 Wheel Loader

986 Wheel Loader

At a Glance

Engine Model
C15 Cat®
Peak Power Speed
1600
Peak Power Speed - Gross - SAE J1995
456 HP
Engine Power - ISO 14396
449 HP
Request a Demo Machine Comparison

Overview

Engine

+ -
Engine Model C15 Cat®
Peak Power Speed 1600
Peak Power Speed - Gross - SAE J1995 456HP
Engine Power - ISO 14396 449HP
Net Power - SAE J1349 373HP
Rated Speed 2000
Rated Speed - 2,000 rpm - EEC 80/1269 373HP
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) 378HP
Rated Speed - 2,000 rpm - ISO 9249 373HP
Rated Speed - 2,000 rpm - ISO 9249 (DIN) 378HP
Bore 5.4in
Stroke 6.75in
Displacement 927in²
Peak Torque - 1,200 rpm - SAE J1995 1778lb/ft
Torque Rise 16%
Emissions U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA

Transmission

+ -
Transmission Type Cat planetary power shift
Forward - 1 5mile/h
Forward - 2 8mile/h
Direct Drive - Forward 2 8mile/h
Direct Drive - Forward 3 14mile/h
Direct Drive - Forward 4 24mile/h
Reverse - 1 5mile/h
Reverse - 2 8mile/h
Direct Drive - Reverse 2 9mile/h
Direct Drive - Reverse 3 16mile/h
Direct Drive - Reverse 4 25.4mile/h

Operating Specifications

+ -
Operating Weight - Standard 97785lb
Operating Weight - High Lift 104005lb
Rated Payload - Standard (Quarry Face) 11ton (US)
Rated Payload - Loose Material (Standard) 14ton (US)
Rated Payload - High Lift (Quarry Face) 11ton (US)
Rated Payload - Loose Material (High Lift) 12.1ton (US)
Bucket Capacity Range 5-10,3 m³ (6,5-13,5 yd.³)
Cat Truck Match - Standard 770/735/740/745
Cat Truck Match - High Lift 772/773

Hydraulic System - Lift/Tilt

+ -
Lift/Tilt System - Circuit Load Sense
Lift/Tilt System - Pump 2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm 123gal/min
Relief Valve Setting - Lift/Tilt 4050psi
Lift Cylinder - Bore 7.5in
Lift Cylinder - Stroke 45in
Tilt Cylinder - Bore 6.7in
Tilt Cylinder - Stroke 28.4in

Hydraulic Cycle Times

+ -
Rack Back 4.5s
Raise 9s
Dump 3.5s
Lower 5.2s
Lower Float Down 4.3s
Total Hydraulic Cycle Time 21.3s

Hydraulic System - Steering

+ -
Steering System - Circuit Load Sense
Steering System - Pump Piston, variable displacement
Maximum Flow at 1,400 rpm 52gal/min
Steering Cut Off Pressure 4000psi
Total Steering Angle 70°

Air Conditioning System

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Axles

+ -
Front Fixed
Rear Trunnion
Oscillation Angle ±12.5°
Oscillation Angle - Chain Arrangement ±8.5°

Brakes

+ -
Brakes ISO 3450:2011

Service Refill Capacities

+ -
Fuel Tank 141gal (US)
Fuel Tank - Short Lift 127gal (US)
Cooling Systems 26gal (US)
Crankcase 9gal (US)
Diesel Exhaust Fluid Tank 6gal (US)
Transmission 20gal (US)
Axle Oil - Differentials and Final Drives - Front 49gal (US)
Axle Oil - Differentials and Final Drives - Rear 45gal (US)
Hydraulic System Factory Fill 87gal (US)
Hydraulic System - Tank Only 34gal (US)

Operator's Cab

+ -
ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)

Sound Performance - Standard

+ -
Operator Sound Level (ISO 6396) 72dB(A)
Machine Sound Level (ISO 6395) 112dB(A)
Note
  • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Hearing protection may be neede

Sound Performance - Suppression

+ -
Operator Sound Level (ISO 6396) 72dB(A)
Machine Sound Level (ISO 6395) 110dB(A)
Note
  • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Hearing protection may be neede

Dimensions (Approximate) - Standard Lift Linkage

+ -
Ground to Top of ROPS 13.5ft
Ground to Top of Exhaust Stacks 13.3ft
Ground to Top of Hood 10.7ft
Ground to Center of Front Axle 3.2ft
Ground to Fuel Tank Clearance 2.3ft
Ground to Lower Hitch Clearance 1.5ft
Reach - Maximum Lift 7.1ft
Clearance at Maximum Lift 10.1ft
B-Pin Height - Maximum Lift 16.1ft
Maximum Overall Height - Bucket Raised 22.4ft
Rear Axle - Centerline to Bumper 10.3ft
Wheel Base 12.5ft
Maximum Overall Length 36.6ft
Front Axle Centerline to Bucket Tip 13.8ft
Note
  • All dimensions are approximate.
  • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

Dimensions (Approximate) - High Lift Linkage

+ -
Ground to Top of ROPS 13.5ft
Ground to Top of Exhaust Stacks 13.3ft
Ground to Top of Hood 10.7ft
Ground to Center of Front Axle 3.2ft
Ground to Fuel Tank Clearance 2.3ft
Ground to Lower Hitch Clearance 1.5ft
Reach - Maximum Lift 7.4ft
Clearance at Maximum Lift 11.6ft
B-Pin Height - Maximum Lift 17.6ft
Maximum Overall Height - Bucket Raised 23.9ft
Rear Axle - Centerline to Bumper 10.3ft
Wheel Base 12.5ft
Maximum Overall Length 38ft
Front Axle Centerline to Bucket Tip 15.3ft
Note
  • All dimensions are approximate.
  • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

+ -
Ground to Top of ROPS 13.5ft
Ground to Top of Exhaust Stacks 13.3ft
Ground to Top of Hood 10.7ft
Ground to Center of Rear Axle 3.2ft
Ground to Fuel Tank Clearance 2.3ft
Ground to Lower Hitch Clearance 1.5ft
Reach at Maximum Lift 8ft
Clearance at Maximum Lift 10.7ft
B-Pin Height at Maximum Lift 15ft
Maximum Overall Height, Bucket Raised 20.9ft
Rear Axle Center Line to Bumper 10.3ft
Wheel Base 12.5ft
Maximum Overall Length 35ft
Front Axle Centerline to Bucket Tip 12.2ft

Dimensions (Approximate) - Quick Coupler and Fork

+ -
Ground to Top of ROPS 13.5ft
Ground to Top of Exhaust Stacks 13.3ft
Ground to Top of Hood 10.7ft
Ground to Center of Rear Axle 3.2ft
Ground to Fuel Tank Clearance 2.3ft
Ground to Lower Hitch Clearance 1.5ft
B-Pin Height at Maximum Lift 15ft
Rear Axle Center Line to Bumper 10.3ft
Wheel Base 12.5ft
Maximum Overall Length 35.4ft
Front Axle Centerline to Bucket Tip 12.6ft