3516C Generator Set
360° Exterior View
At a Glance
|
|
|
|
Overview
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Generator Set Specifications
+ -Standby Rating | 2750 kVA |
Prime Power Rating | 2500 kVA |
Emissions/Fuel Strategy | Low Fuel, Low Emissions |
Voltage | 380 to 11000 volts |
Frequency | 50 Hz |
Speed | 1500 rpm |
Duty Cycle | Standby, Mission Critical, Prime |
Maximum Rating | 2750 kVA |
Minimum Rating | 2500 kVA |
Engine Specifications
+ -Engine Model | 3516C, ATAAC, V-16,4-Stroke Water-Cooled Diesel |
Bore | 6.69in |
Stroke | 8.46in |
Displacement | 4764.73in |
Compression Ratio | 14.7:1 |
Aspiration | TA |
Fuel System | Electronic unit injection |
Governor Type | Adem™3 |
Generator Set Dimensions
+ -Length - Maximum | 297.4in |
Width - Maximum | 108.9in |
Height - Maximum | 118.3in |
Dry Weight - Genset (maximum) | 39090lb |
Standard Equipment:
Air Inlet
+ --
Air cleaner
Cooling
+ --
Package mounted radiator
Exhaust
+ --
Exhaust flange outlet
Fuel
+ --
Fuel priming pump
-
Secondary fuel filter
-
Primary fuel filter with integral water separator
Generator
+ --
Matched to the performance and output characteristics of Cat engines
-
IP23 Protection
Power Termination
+ --
Busbar
Control Panel
+ --
EMCP 4.2B
General
+ --
Paint - Caterpillar Yellow except rails and radiators gloss black
Optional Equipment:
Exhaust
+ -Exhaust mufflers
Generator
+ -Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
Anti-condensation heater
Oversize and premium generators
Power Termination
+ -Circuit breakers, IEC compliant
Circuit breakers, UL listed
Control Panels
+ -EMCP 4.3, EMCP 4.4
Digital I/O module
Load share module
Generator temperature monitoring & protection
Remote monitoring software
Mounting
+ -Spring-type vibration isolator
Rubber anti-vibration mounts
IBC isolators
Starting/charging
+ -Jacket water heater
Charging alternator
Oversize batteries
Battery chargers
Heavy-duty starting system
Air starting motor with control and silencer
General
+ -UL 2200 package
EU Certificate of Conformance (CE)
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
EEC Declaration of Conformity
Integral & sub-base UL listed dual wall fuel tanks
The following options are based on regional and product configuration:
Automatic transfer switches (ATS)
Enclosures: sound attenuated, weather protective
CSA Certification
Integral & sub-base fuel tanks