ATC Molded Case Circuit Breaker & Molded Case Switch Automatic Transfer Switch
At a Glance
Rating Range
30-1000A
|
Transfer Type
Open transition
|
Switch Type
Molded Case
|
Control Power
30-1000A 2, 3, or 4 Pole, 100% Rated
|
Request a Quote
Overview
Cat® transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a compact package. The open transition breaker-based Automatic Transfer Switch (ATS) will provide fully functioning transfer in applications where a momentary loss of power is acceptable on retransfer from emergency to normal power supply. The Cat Open Transition MCCB & MCS types of ATS also permits periodic testing of the emergency source without interrupting power to the loads and are available from 30 to 1000 amperes.
Technical Summary
+
-
Rating Range |
30-1000A |
Transfer Type |
Open transition |
Switch Type |
Molded Case |
Ratings
+
-
Control Power |
30-1000A 2, 3, or 4 Pole, 100% Rated |
System Voltage Application |
120 - 600 Vac, 50/60 Hz |
Withstand |
100,000 amps withstand/closing/ interrupting at480 Vac |
Applicable Testing |
CSA C22.2 No. 178 certified IBC 2006, CBC 2007 and OSHPD |
Standard Equipment:
Controls And Wiring
+
-
-
All controls relays and industrial grade relays are totally encapsulated to minimize exposure to dust and dirt. Lugs are 90º rated and all control wire is #16 AWG, type XLPE with a 125º temperature rating.
Enclosure
+
-
-
Durable powder-coated steel NEMA 1, NEMA 3R and NEMA 12 are available with ATC-100 and ATC-300+ controllers. NEMA 4 is only available with the ATC-800 controller. The enclosures are Seismic Qualified (BOCA, CBC, IBC, UBC). The hinges have removable hinge pins to facilitate door removal for easy wall mounting or service and are supplied with pad-lockable latches.
Optional Equipment:
Available Options
+
-
Suitable for service entrance
Load sequencing contacts
Selectable automatic or non-automatic operation
Controller availability: ATC-100, ATC-300+,and ATC-800
Field selectable, multi ratio, control voltage transformer 50/60 Hz
Surge suppression
Multi-meter options available
Integral overcurrent protection
Space heaters
Remote communications
Communications for the ATC-300+ Controller via RS-232 or Modbus through an integrated RS-485 port
2- or 4-position test switch
Optional Delayed Transition Includes:
+
-
Pre-transfer signal with 1 N.O. and 1 N.C. contacts
Time delay neutral