C15 Generator Set
360° Exterior View
360° Exterior View
At a Glance
|
|
|
|
|
|
|
|
Overview
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Generator Set Specifications
+ -| Maximum Rating | 500 ekW |
| Minimum Rating | 400 ekW |
| Emissions/Fuel Strategy | Low Fuel Consumption |
| Voltage | 208 to 600 Volts |
| Frequency | 60 Hz |
| Speed | 1800 rpm |
| Duty Cycle | Standby, Prime |
Engine Specifications
+ -| Engine Model | C15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel |
| Bore | 5.4in |
| Stroke | 6.75in |
| Displacement | 927.56in³ |
| Compression Ratio | 16.1:1 |
| Aspiration | Air to Air Aftercooled |
| Fuel System | MEUI |
| Governor Type | Adem™A4 |
Generator Set Dimensions
+ -| Length - Maximum | 168.2in |
| Width - Maximum | 81in |
| Height - Maximum | 82.4in |
Standard Equipment:
Air System
+ --
Turbocharger
-
Air cleaner - Non canister disposable paper filter
-
Aftercooler core
Air Inlet
+ --
Air cleaner
Control Panel
+ --
GCCP 1.3
-
GCCP Genset Controller
Cooling
+ --
Package mounted radiator
Cooling System
+ --
Coolant drain line with valve
-
Fan drive, battery charging alternator drive
-
Caterpillar extended life coolant
-
Radiator and cooling fan with guard
Exhaust
+ --
Base, formed steel with single wall integral 8-hour fuel tank
-
Standard open set fuel tank/base supplied
-
Exhaust flange outlet
Fuel
+ --
Primary fuel filter with integral water separator
-
Secondary fuel filters
-
Fuel priming pump
Fuel System
+ --
Engine fuel transfer pump
-
Flexible fuel lines
-
Fuel cooler
-
Fuel priming pump
-
Primary fuel filter w/integral water separator and secondary filter
Generator
+ --
IP23 Protection
-
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
-
Matched to the performance and output characteristics of Cat engines
Power Termination
+ --
Busbar
Mounting
+ --
Rubber vibration isolators
Generator And Attachments
+ --
Segregated low voltage (AC/DC) wiring panel
-
Optional LC Frame generator - IP23 Protection
-
Power center, IP22
-
Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
-
Integrated voltage regulator (IVR)
-
A Frame generator - IP21 Protection
Governing System
+ --
Cat electronic governor (ADEM A4).
Lube System
+ --
Oil drain valves
-
Oil cooler
Mounting System
+ --
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
Starting/charging
+ --
24 Volt battery with rack and cables
-
24 volt starting motor
-
Batteries
General
+ --
Engine and alternator pre paint, Caterpillar yellow
-
Paint - Caterpillar yellow except rails and radiators gloss black
Optional Equipment:
Air Inlet System
+ -Single element air cleaner
Dual element air cleaner
Exhaust
+ -Industrial, residential, critical mufflers
Certifications
+ -Global certification for CIS
EU Certificate of Conformance (CE)
Generator
+ -Anti-condensation heater
Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Oversize and premium generators
Circuit Breakers
+ -4 Pole (IEC-100% rated) Circuit breakers - Package mounted
Power terminal strip
4 Pole (IEC-100% rated) Circuit breakers - Motorised
Shunt trip for IEC circuit breaker
Padlockable circuit breaker device
Auxiliary contacts, circuit breaker
3 Pole (IEC-100% rated) Circuit breakers - Motorised
3 Pole (IEC-100% rated) Circuit breakers - Package mounted
Power Termination
+ -Circuit breakers, IEC compliant
Circuit breakers, UL listed
Control Panels
+ -Remote annunciator module
Local alarm horn
Local annunciator
Oil temperature displays
GCCP 1.4
Volt free contacts
Protective devices: Earth fault relay ; Earth leakage Ground fault relay ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor
Starting/charging
+ -Charging alternator
Battery chargers
Oversize batteries
Heavy duty starting system
Jacket water heater
Cooling System
+ -Low coolant temperature alarm
Stone guards
Radiator duct flange
Enclosures
+ -Sound attenuated enclosures
High ambient sound attenuated enclosures
Exhaust System
+ -Engine mounted muffler
6 and 8 inch elbow kit
Manifold and turbocharger guards
End in/end out mufflers - 10, 25 and 35 dBA attenuation
6 and 8 inch flange GP
Flexible exhaust fittings
Fuel System
+ -Fuel transfer system controls
Manual fuel transfer pump
Dual wall fuel tank base
General
+ -Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
Sound attenuated, weather protective or high ambient weather protective enclosure
EU Certificate of Conformance (CE)
Single or dual wall integral fuel tanks
CSA Certification
EEC Declaration of Conformity
Narrow, wide or skid base
Integral & sub-base UL listed dual wall fuel tanks
Automatic transfer switches (ATS)
UL 2200 package
The following options are based on regional and product configuration:
Single or dual wall sub-base fuel tanks
Generator And Attachments
+ -Oversize LC frame generator
Oversize A Frame generator
CIP A Frame generator
LC frame generator
LC frame CIP generator
Ingress protection
Permanent magnet excitation (PMG) generator
Space heaters
Lube System
+ -Manual sump pump
Mounting System
+ -Narrow skid base - replaces standard fuel tank base
Special Test / Reports
+ -PGS Test report @ 1.0 power factor
PGS Test report @ 0.8 power factor
Starting / Charging System
+ -5 Amp single Battery charger
Battery disconnect switch
Jacket water heater
