C15 Generator Set
360° Exterior View
360° Exterior View
At a Glance
|
|
|
|
Overview
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Generator Set Specifications
+ -Maximum Rating | 550 kVA |
Minimum Rating | 365 kVA |
Emissions/Fuel Strategy | Tier 2 or Tier 3 |
Voltage | 208 to 600 Volts |
Frequency | 50 Hz |
Speed | 1500 rpm |
Duty Cycle | Standby, Prime |
Engine Specifications
+ -Engine Model | C15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel |
Bore | 5.4in |
Stroke | 6.75in |
Displacement | 927.56in³ |
Compression Ratio | 16.1:1 |
Aspiration | Air to Air Aftercooled |
Fuel System | MEUI |
Governor Type | Adem™A4 |
Generator Set Dimensions
+ -Length - Maximum | 150.8in |
Width - Maximum | 58.3in |
Height - Maximum | 86.3in |
Standard Equipment:
Air System
+ --
Turbocharger
-
Aftercooler core
-
Air cleaner - Non canister disposable paper filter
Air Inlet
+ --
Air cleaner
Control Panel
+ --
GCCP 1.3
Cooling
+ --
Package mounted radiator
Cooling System
+ --
Caterpillar extended life coolant
-
Radiator and cooling fan with guard
-
Fan drive, battery charging alternator drive
-
Coolant drain line with valve
Exhaust
+ --
Base, formed steel with single wall integral 8-hour fuel tank
-
Standard open set fuel tank/base supplied
Fuel
+ --
Primary fuel filter with integral water separator
-
Secondary fuel filters
-
Fuel priming pump
Fuel System
+ --
Engine fuel transfer pump
-
Primary fuel filter w/integral water separator and secondary filter
-
Fuel priming pump
-
Flexible fuel lines
-
Fuel cooler
Generator
+ --
Matched to the performance and output characteristics of Cat engines
-
IP23 Protection
-
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Power Termination
+ --
Busbar
Generator And Attachments
+ --
Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
-
Optional LC Frame generator - IP23 Protection
-
Segregated low voltage (AC/DC) wiring panel
-
Integrated voltage regulator (IVR)
-
Power center, IP22
Mounting
+ --
Rubber vibration isolators
Governing System
+ --
Cat electronic governor (ADEM A4).
Lube System
+ --
Oil cooler
-
Oil drain valves
Mounting System
+ --
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
Starting/charging
+ --
24 Volt battery with rack and cables
General
+ --
Engine and alternator pre paint, Caterpillar yellow
Optional Equipment:
Air Inlet System
+ -Single element air cleaner
Dual element air cleaner
Exhaust
+ -Industrial, residential, critical mufflers
Certifications
+ -EU Certificate of Conformance (CE)
Global certification for CIS
Generator
+ -Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Oversize and premium generators
Anti-condensation heater
Power Termination
+ -Circuit breakers, UL listed
Circuit breakers, IEC compliant
Circuit Breakers
+ -Shunt trip for IEC circuit breaker
4 Pole (IEC-100% rated) Circuit breakers - Package mounted
Auxiliary contacts, circuit breaker
3 Pole (IEC-100% rated) Circuit breakers - Package mounted
3 Pole (IEC-100% rated) Circuit breakers - Motorised
Power terminal strip
4 Pole (IEC-100% rated) Circuit breakers - Motorised
Padlockable circuit breaker device
Generator And Attachments
+ -Permanent magnet excitation (PMG) generator
LC frame CIP generator
Oversize LC frame generator
Space heaters
CIP A Frame generator
Oversize A Frame generator
Ingress protection
A Frame generator - IP21 Protection
LC frame generator
Control Panels
+ -Fuel level sensor
Volt free contacts
Oil temperature displays
Local annunciator
GCCP 1.4
Local alarm horn
Remote annunciator module
Starting/charging
+ -Oversize batteries
Battery chargers
Jacket water heater
Heavy duty starting system
Charging alternator
Cooling System
+ -Low coolant temperature alarm
Stone guards
Radiator duct flange
General
+ -Narrow, wide or skid base
Single or dual wall integral fuel tanks
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
The following options are based on regional and product configuration:
Automatic transfer switches (ATS)
Integral & sub-base UL listed dual wall fuel tanks
CSA Certification
EEC Declaration of Conformity
Single or dual wall sub-base fuel tanks
UL 2200 package
Sound attenuated, weather protective or high ambient weather protective enclosure
EU Certificate of Conformance (CE)
Enclosures
+ -High ambient sound attenuated enclosures
Sound attenuated enclosures
Exhaust System
+ -6 and 8 inch elbow kit
Manifold and turbocharger guards
End in/end out mufflers - 10, 25 and 35 dBA attenuation
Engine mounted muffler
6 and 8 inch flange GP
Flexible exhaust fittings
Fuel System
+ -Fuel transfer system controls
Manual fuel transfer pump
Dual wall fuel tank base
Lube System
+ -Manual sump pump
Mounting System
+ -Narrow skid base - replaces standard fuel tank base
Special Test / Reports
+ -PGS Test report @ 1.0 power factor
PGS Test report @ 0.8 power factor
Starting / Charging System
+ -5 Amp single Battery charger
Jacket water heater
Battery disconnect switch