C18 Generator Set
360° Exterior View
360° Exterior View
At a Glance
|
|
|
|
|
|
|
|
Overview
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Generator Set Specifications
+ -| Maximum Rating | 600 ekW |
| Minimum Rating | 455 ekW |
| Emissions/Fuel Strategy | U.S. EPA Cert., Tier 2 |
| Voltage | 208 to 600 Volts |
| Frequency | 60 Hz |
| Speed | 1800 rpm |
| Duty Cycle | Standby, Prime |
Engine Specifications
+ -| Engine Model | C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel |
| Bore | 5.71in |
| Stroke | 7.2in |
| Displacement | 1106.4l |
| Compression Ratio | 14.5:1 |
| Aspiration | Air to Air Aftercooled |
| Fuel System | Electronic unit injection |
| Governor Type | Adem™A4 |
Generator Set Dimensions
+ -| Length - Maximum | 5550in |
| Width - Maximum | 80.9in |
| Height - Maximum | 107.8in |
Standard Equipment:
Air Inlet
+ --
Air cleaner
Air Inlet System
+ --
Turbocharger
-
Light duty air cleaner
-
Aftercooler core
Cooling
+ --
Caterpillar extended life coolant
-
Fan drive, battery charging alternator drive
-
Coolant drain line with valve
-
Radiator and cooling fan with guard
-
Package mounted radiator
Exhaust
+ --
Exhaust flange outlet
Exhaust System
+ --
Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use - shipped loose
Fuel System
+ --
Standard 8 hour open set fuel tank
Fuel
+ --
Secondary fuel filters
-
Fuel priming pump
-
Primary fuel filter with integral water separator
Generator And Attachments
+ --
Matched to the performance and output characteristics of Cat engines
-
Segregated low voltage (AC/DC) wiring panel
-
Power center, IP22
-
A Frame generator - IP21 protection
-
Integrated voltage regulator (IVR)
-
Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
-
Integrated voltage regulator (IVR)
Generator
+ --
IP23 Protection
-
Matched to the performance and output characteristics of Cat engines
-
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Power Termination
+ --
Busbar
Control System
+ --
GCCP 1.2
Governing System
+ --
Cat electronic governor (ADEM A4)
Control Panel
+ --
EMCP 4 Genset controller
Lube System
+ --
Lubricating oil
-
Oil drain valves
Mounting System
+ --
Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines
Mounting
+ --
Rubber vibration isolators
Starting/charging
+ --
24 Volt battery with rack and cables
-
24 volt starting motor
-
Batteries
General
+ --
Engine and alternator pre-paint, Caterpillar yellow
-
Paint - Caterpillar yellow except rails and radiators gloss black
Optional Equipment:
Air Inlet System
+ -Single element air cleaner
Dual element air cleaner
Exhaust
+ -Industrial, residential, critical mufflers
Generator
+ -Oversize and premium generators
Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Anti-condensation heater
Power Termination
+ -Circuit breakers, UL listed
Circuit breakers, IEC compliant
Circuit Breakers
+ -3 Pole (IEC-100% rated) Circuit breakers - Motorised
4 Pole (IEC-100% rated) Circuit breakers - Motorised
Shunt trip for IEC breaker
Power terminal strip
Circuit breaker (IEC) Auxiliary contacts
3 Pole (IEC-100% rated) Circuit breakers - Package mounted
Padlockable circuit breaker device
4 Pole (IEC-100% rated) Circuit breakers - Package mounted
Control Panels
+ -Remote monitoring software
Load share module
Local & remote annunciator modules
GCCP 1.2, GCCP 1.5
Digital I/O module
Control System
+ -Local alarm modules
Volt free contact
Local alarm horn
Remote annunciator module
Oil temperature displays
Protective devices: Earth fault relay - earth leageage Ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - High fuel level alarm - Fuel level sensor
GCCP 1.5
Cooling System
+ -Low coolant temperature alarm
Radiator duct flange
Enclosures
+ -Sound attenuated enclosures
Starting/charging
+ -Jacket water heater
Battery chargers
Heavy duty starting system
Oversize batteries
Charging alternator
Exhaust System
+ -8 and 10 inch GP flanges
8 and 10 inch elbow kits
Engine mounted muffler
10, 25 and 35 end in / end out mufflers
Manifold and turbocharger guards
Fuel System
+ -Manual fuel transfer pump
Fuel transfer system
Integral - Dual wall fuel tank base
General
+ -Sound attenuated, weather protective or high ambient weather protective enclosure
Integral & sub-base UL listed dual wall fuel tanks
CSA Certification
Automatic transfer switches (ATS)
The following options are based on regional and product configuration:
Single or dual wall sub-base fuel tanks
EU Certificate of Conformance (CE)
EEC Declaration of Conformity
UL 2200 package
Single or dual wall integral fuel tanks
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
Narrow, wide or skid base
Enclosures: Sound attenuated, weather protective
Generator And Attachments
+ -Space heaters
A Frame CIP generator
Permanent magnet excitation (PMG)
LC frame generator
A Frame oversize generator
Ingress protection
LC frame CIP generator
LC frame oversize generators
Lube System
+ -Manual sump pump
Starting And Charging
+ -Battery disconnect switch
Jacket water heaters
5 Amp Battery charger
