C18 Generator Set
360° Exterior View
360° Exterior View
At a Glance
|
|
|
|
|
|
|
|
Overview
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Generator Set Specifications
+ -| Maximum Rating | 600 ekW |
| Minimum Rating | 455 ekW |
| Emissions/Fuel Strategy | Low Fuel Consumption |
| Voltage | 208 to 600 Volts |
| Frequency | 60 Hz |
| Speed | 1800 rpm |
| Duty Cycle | Standby, Prime |
Engine Specifications
+ -| Engine Model | C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel |
| Bore | 5.71in |
| Stroke | 7.2in |
| Displacement | 1106.4in³ |
| Compression Ratio | 14.5:1 |
| Aspiration | Air to Air Aftercooled |
| Fuel System | Electronic unit injection |
| Governor Type | Adem™A4 |
Generator Set Dimensions
+ -| Length - Maximum | 218.5in |
| Width - Maximum | 80.9in |
| Height - Maximum | 107.8in |
Standard Equipment:
Air Inlet
+ --
Air cleaner
Air Inlet System
+ --
Light duty air cleaner
-
Turbocharger
-
Aftercooler core
Governing System
+ --
Cat electronic governor (ADEM A4)
Control System
+ --
GCCP 1.2
Cooling
+ --
Radiator and cooling fan with guard
-
Fan drive, battery charging alternator drive
-
Coolant drain line with valve
-
Caterpillar extended life coolant
-
Package mounted radiator
Exhaust
+ --
Exhaust flange outlet
Exhaust System
+ --
Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use - shipped loose
Fuel
+ --
Fuel priming pump
-
Secondary fuel filters
-
Primary fuel filter with integral water separator
Fuel System
+ --
Standard 8 hour open set fuel tank
Generator And Attachments
+ --
Matched to the performance and output characteristics of Cat engines
-
Integrated voltage regulator (IVR)
-
Segregated low voltage (AC/DC) wiring panel
-
A Frame generator - IP21 protection
-
Integrated voltage regulator (IVR)
-
Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
-
Power center, IP22
Generator
+ --
IP23 Protection
-
Matched to the performance and output characteristics of Cat engines
-
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Power Termination
+ --
Busbar
Control Panel
+ --
GCCP Genset Controller
Lube System
+ --
Lubricating oil
-
Oil drain valves
Mounting
+ --
Rubber vibration isolators
Mounting System
+ --
Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines
Starting/charging
+ --
24 Volt battery with rack and cables
-
24 volt starting motor
-
Batteries
General
+ --
Engine and alternator pre-paint, Caterpillar yellow
-
Paint - Caterpillar yellow except rails and radiators gloss black
Optional Equipment:
Air Inlet System
+ -Dual element air cleaner
Single element air cleaner
Exhaust
+ -Industrial, residential, critical mufflers
Circuit Breakers
+ -3 Pole (IEC-100% rated) Circuit breakers - Motorised
Power terminal strip
3 Pole (IEC-100% rated) Circuit breakers - Package mounted
Shunt trip for IEC breaker
Padlockable circuit breaker device
Circuit breaker (IEC) Auxiliary contacts
4 Pole (IEC-100% rated) Circuit breakers - Package mounted
4 Pole (IEC-100% rated) Circuit breakers - Motorised
Generator
+ -Anti-condensation heater
Oversize and premium generators
Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Power Termination
+ -Circuit breakers, UL listed
Circuit breakers, IEC compliant
Control Panels
+ -Load share module
Local & remote annunciator modules
GCCP 1.2, GCCP 1.5
Remote monitoring software
Digital I/O module
Control System
+ -Protective devices: Earth fault relay - earth leageage Ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - High fuel level alarm - Fuel level sensor
Local alarm modules
Local alarm horn
Oil temperature displays
GCCP 1.5
Volt free contact
Remote annunciator module
Starting/charging
+ -Heavy duty starting system
Battery chargers
Jacket water heater
Charging alternator
Oversize batteries
Cooling System
+ -Low coolant temperature alarm
Radiator duct flange
Enclosures
+ -Sound attenuated enclosures
Exhaust System
+ -Engine mounted muffler
8 and 10 inch GP flanges
10, 25 and 35 end in / end out mufflers
Manifold and turbocharger guards
8 and 10 inch elbow kits
Fuel System
+ -Manual fuel transfer pump
Integral - Dual wall fuel tank base
Fuel transfer system
General
+ -CSA Certification
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
Integral & sub-base UL listed dual wall fuel tanks
Narrow, wide or skid base
Single or dual wall integral fuel tanks
Automatic transfer switches (ATS)
UL 2200 package
The following options are based on regional and product configuration:
Single or dual wall sub-base fuel tanks
EEC Declaration of Conformity
Sound attenuated, weather protective or high ambient weather protective enclosure
Enclosures: Sound attenuated, weather protective
EU Certificate of Conformance (CE)
Generator And Attachments
+ -Ingress protection
Permanent magnet excitation (PMG)
A Frame CIP generator
LC frame generator
LC frame oversize generators
A Frame oversize generator
LC frame CIP generator
Space heaters
Lube System
+ -Manual sump pump
Starting And Charging
+ -Jacket water heaters
5 Amp Battery charger
Battery disconnect switch
