C18 Generator Set
360° Exterior View
At a Glance
|
|
|
|
Overview
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Generator Set Specifications
+ -Maximum Rating | 715 kVA |
Minimum Rating | 550 kVA |
Emissions/Fuel Strategy | Low Fuel, China Nonroad III Emis Stds |
Voltage | 380 to 415 Volts |
Frequency | 50 Hz |
Speed | 1500 rpm |
Duty Cycle | Standby, Prime |
Engine Specifications
+ -Engine Model | C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel |
Bore | 5.71in |
Stroke | 7.2in |
Displacement | 1106.36in³ |
Compression Ratio | 14.5:1 |
Aspiration | Air to Air Aftercooled |
Fuel System | Electronic unit injection |
Governor Type | Ademâ„¢A4 |
Generator Set Dimensions
+ -Length - Maximum | 162.4in |
Width - Maximum | 78.3in |
Height - Maximum | 75in |
Standard Equipment:
Air Inlet System
+ --
Turbocharger
-
Light duty air cleaner
-
Aftercooler core
Air Inlet
+ --
Air cleaner
Control System
+ --
GCCP 1.2
Exhaust
+ --
Exhaust flange outlet
Cooling
+ --
Coolant drain line with valve
-
Caterpillar extended life coolant
-
Fan drive, battery charging alternator drive
-
Radiator and cooling fan with guard
Exhaust System
+ --
Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use - shipped loose
Fuel
+ --
Secondary fuel filters
-
Fuel priming pump
-
Primary fuel filter with integral water separator
Fuel System
+ --
Standard 8 hour open set fuel tank
Generator
+ --
IP23 Protection
-
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
-
Matched to the performance and output characteristics of Cat engines
Generator And Attachments
+ --
Segregated low voltage (AC/DC) wiring panel
-
Integrated voltage regulator (IVR)
-
A Frame generator - IP21 protection
-
Integrated voltage regulator (IVR)
-
Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
-
Power center, IP22
-
Matched to the performance and output characteristics of Cat engines
Power Termination
+ --
Busbar
Governing System
+ --
Cat electronic governor (ADEM A4)
Control Panel
+ --
GCCP Genset Controller
Lube System
+ --
Lubricating oil
-
Oil drain valves
Mounting
+ --
Rubber vibration isolators
Mounting System
+ --
Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines
Starting/charging
+ --
24 Volt battery with rack and cables
General
+ --
Engine and alternator pre-paint, Caterpillar yellow
Optional Equipment:
Exhaust
+ -Industrial, residential, critical mufflers
Air Inlet System
+ -Dual element air cleaner
Single element air cleaner
Circuit Breakers
+ -3 Pole (IEC-100% rated) Circuit breakers - Motorised
4 Pole (IEC-100% rated) Circuit breakers - Motorised
Circuit breaker (IEC) Auxiliary contacts
Padlockable circuit breaker device
3 Pole (IEC-100% rated) Circuit breakers - Package mounted
4 Pole (IEC-100% rated) Circuit breakers - Package mounted
Power terminal strip
Shunt trip for IEC breaker
Generator
+ -Anti-condensation heater
Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Oversize and premium generators
Power Termination
+ -Circuit breakers, IEC compliant
Circuit breakers, UL listed
Control Panels
+ -Local & remote annunciator modules
Load share module
Remote monitoring software
EMCP (4.2) (4.3) (4.4)
Digital I/O module
Control System
+ -Oil temperature displays
GCCP 1.5
Volt free contact
Protective devices: Earth fault relay - earth leageage Ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - High fuel level alarm - Fuel level sensor
Local alarm modules
Remote annunciator module
Local alarm horn
Cooling System
+ -Low coolant temperature alarm
Radiator duct flange
Starting/charging
+ -Oversize batteries
Jacket water heater
Battery chargers
Heavy duty starting system
Charging alternator
Enclosures
+ -Sound attenuated enclosures
Exhaust System
+ -Manifold and turbocharger guards
Engine mounted muffler
8 and 10 inch elbow kits
8 and 10 inch GP flanges
10, 25 and 35 end in / end outmufflers
Fuel System
+ -Integral - Dual wall fuel tank base
Manual fuel transfer pump
Fuel transfer system
Generator And Attachments
+ -LC frame generator
Permanent magnet excitation (PMG)
LC frame oversize generators
Space heaters
A Frame oversize generator
A Frame CIP generator
Ingress protection
LC frame CIP generator
General
+ -Single or dual wall integral fuel tanks
UL 2200 package
Enclosures: Sound attenuated, weather protective
EU Certificate of Conformance (CE)
Integral & sub-base UL listed dual wall fuel tanks
Narrow, wide or skid base
The following options are based on regional and product configuration:
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
EEC Declaration of Conformity
CSA Certification
Sound attenuated, weather protective or high ambient weather protective enclosure
Automatic transfer switches (ATS)
Single or dual wall sub-base fuel tanks
Lube System
+ -Manual sump pump
Starting And Charging
+ -Jacket water heaters
5 Amp Battery charger
Battery disconnect switch