C280-12 Generator Set (Medium Speed)
At a Glance
|
Maximum Rating
3640 ekW (60Hz), 4850 kVA (50Hz)
|
|
Minimum Rating
3300 ekW (60Hz), 4400 kVA (50Hz)
|
|
Emissions/Fuel Strategy
EPA Tier 4 Final, IMO Tier 2
|
|
Frequency
50 / 60 Hz
|
Request a Quote
Overview
Generator Set Specifications
+
-
| Maximum Rating |
3640 ekW (60Hz), 4850 kVA (50Hz) |
| Minimum Rating |
3300 ekW (60Hz), 4400 kVA (50Hz) |
| Emissions/Fuel Strategy |
EPA Tier 4 Final, IMO Tier 2 |
| Frequency |
50 / 60 Hz |
| Speed |
900 / 1000 rpm |
| Duty Cycle |
Prime, Continuous |
Engine Specifications
+
-
| Engine Model |
C280-12, V-12,4-Stroke Water-Cooled Diesel |
| Bore |
11in |
| Stroke |
11.8in |
| Displacement |
13524in³ |
| Compression Ratio |
13:01 |
| Aspiration |
TA |
| Fuel System |
Direct unit injection |
| Governor Type |
Generator Set Monitoring System (GMS) |
Generator Set Dimensions
+
-
| Length - Maximum |
404in |
| Width - Maximum |
99.62in |
| Height - Maximum |
156.6in |
| Dry Weight - Genset (maximum) |
112690lb |
Standard Equipment:
Air Inlet System
+
-
-
Air cleaner
-
Air inlet shutoff
-
Breather, crankcase, top-mounted
-
Turbocharger, watercooled, engine oil lubricated
-
Aftercooler, fresh water, corrosion resistant coated (air side)
Cooling System
+
-
-
Front mounted turbos
-
Jacket water thermostats
-
Water temperature regulator
-
Engine coolant water drains
-
Three-bundle oil cooler
Exhaust System
+
-
-
457 mm (18 in) Cat bolt pattern
-
Dry, gas tight, exhaust manifold
-
Includes adapter, flexible exhaust fitting
Generator System
+
-
-
Custom generator per generator data sheet completed by Dealer
Lube System
+
-
-
Oil filler and dipstick
-
Centrifugal oil filters with single shutoff
-
Crankcase explosion relief valves
-
Oil pressure regulating valve
-
Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
-
Service side engine mounted on cylinder block inspection covers
Mounting System
+
-
-
Engine and generator mounting
-
Damper, torsional vibration
Starting / Charging System
+
-
-
Vane type air starter
-
Two motors, engine mounted at rear, on left side
-
Line group for single point custom connection
-
Air silencer
General:
+
-
-
Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
-
Paint, Caterpillar yellow
Optional Equipment:
Air Inlet System
+
-
Boost control valve
Soot filter
Heavy duty air cleaner
Air cleaner louver assembly
Vertical support bracket
Air inlet adapter
Cooling System
+
-
Expansion tank
Heating aids
Cooling system aids
Heat exchanger for single circuit
Auxiliary water pump
Exhaust System
+
-
Weld flange and related hardware
Flexible exhaust fittings
Fuel System
+
-
Fuel priming pump
Fuel system connections
Duplex primary fuel strainer
Generator System
+
-
Anti-condensation space heaters
Winding temperature detectors
Busbar connections
Class F insulation
3 Phase, six leads, WYE
Governor System
+
-
Battery backup/power supply
Electronic/actuators
723 Plus
230 UA
EGB actuator
Digital programmers
Lube System
+
-
Lube ANSI adapter (Emergency connection)
Oil pan drain valve
Mounting System
+
-
Spring type vibration isolators
Non-vertically restrained
Isolator
Vertically restrained
Starting / Charging System
+
-
Compressed air flex hose
Turbine type air starters
Redundant air starters
Pressure reducing valve
