C280-6 Generator Set (Medium Speed)
At a Glance
|
Maximum Rating
2000 ekW
|
|
Minimum Rating
1650 ekW
|
|
Emissions/Fuel Strategy
IMO - Tier 2
|
|
Frequency
60 Hz
|
Request a Quote
Overview
Generator Set Specifications
+
-
| Maximum Rating |
2000 ekW |
| Minimum Rating |
1650 ekW |
| Emissions/Fuel Strategy |
IMO - Tier 2 |
| Frequency |
60 Hz |
| Speed |
900 rpm |
| Duty Cycle |
Standby, Prime, Continuous |
Engine Specifications
+
-
| Engine Model |
3606 I-6,4-Stroke Water-Cooled Diesel |
| Bore |
11in |
| Stroke |
11.8in |
| Displacement |
111in³ |
| Compression Ratio |
13:01 |
| Aspiration |
TA |
| Fuel System |
Direct unit injection |
| Governor Type |
Generator Set Monitoring System (GMS) |
Generator Set Dimensions
+
-
| Length - Maximum |
404in |
| Width - Maximum |
99.62in |
| Height - Maximum |
156.6in |
| Dry Weight - Genset (maximum) |
74970lb |
Standard Equipment:
Air Inlet System
+
-
-
Air inlet shutoff
-
Aftercooler, fresh water, corrosion resistant coated (air side)
-
Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
-
Breather, crankcase, top-mounted
Cooling System
+
-
-
Water temperature regulator
-
Engine coolant water drains
-
Jacket water thermostats
Exhaust System
+
-
-
Includes adapter, Flexible exhaust fitting
-
Dry, gas tight, exhaust manifold
-
457 mm (18 in) Cat bolt pattern
Generator System
+
-
-
Custom generator per generator data sheet completed by dealer
Lube System
+
-
-
Wet oil sump. Includes engine-driven main lubrication & oil pumps, Oil Lines and Oil Pan
-
Centrifugal oil filters with single shutoff
-
Service side engine mounted on cylinder block inspection covers
-
Crankcase explosion relief valves
-
Oil filler and dipstick
-
Oil pressure regulating valve
Mounting System
+
-
-
Damper, torsional vibration
-
Engine and generator mounting
Starting / Charging System
+
-
-
Vane type air starter
-
Line group for single point custom connection
-
Air silencer
-
One motor, engine mounted at rear, on left side
General:
+
-
-
Gear driven pumps: Fuel / Oil / Jacket water / Aftercooler / Oil cooler water
-
Paint, Caterpillar yellow
Optional Equipment:
Air Inlet System
+
-
Air inlet adapter
Soot filter
Heavy duty air cleaner
Boost control valve
Air cleaner louver assembly
Air cleaner
Vertical support bracket
Cooling System
+
-
Auxiliary water pump
Cooling system aids
Heating aids
Expansion tank
Exhaust System
+
-
Weld flange and related hardware
Flexible exhaust fittings
Fuel System
+
-
Fuel system connections
Fuel priming pump
Duplex primary fuel strainer
Generator System
+
-
Class F insulation
3 Phase, six Leads, WYE
Busbar connections
Winding temperature detectors
Anti-condensation space heaters
Governor System
+
-
723 Plus
Digital programmers
Electronic / actuators
Battery backup / Power supply
2301 A load share
EGB actuator
Lube System
+
-
Oil pan drain valve
Lube ANSI adapter (Emergency connection)
Mounting System
+
-
Isolator
Spring type vibration isolator
Non-vertically restrained
Vertically restrained
Starting / Charging System
+
-
Pressure reducing valve
Compressed air flex hose
