C280-8 Generator Set (Medium Speed)
At a Glance
|
Maximum Rating
2660 ekW
|
|
Minimum Rating
1830 ekW
|
|
Emissions/Fuel Strategy
IMO - Tier 2
|
|
Frequency
60 Hz
|
Request a Quote
Overview
Generator Set Specifications
+
-
| Maximum Rating |
2660 ekW |
| Minimum Rating |
1830 ekW |
| Emissions/Fuel Strategy |
IMO - Tier 2 |
| Frequency |
60 Hz |
| Speed |
720 & 900 rpm |
| Duty Cycle |
Standby, Prime, Continuous |
Engine Specifications
+
-
| Engine Model |
3608 I-8,4-Stroke Water-Cooled Diesel |
| Bore |
11in |
| Stroke |
11.8in |
| Displacement |
9064in³ |
| Compression Ratio |
13:01 |
| Aspiration |
TA |
| Fuel System |
Direct unit injection |
| Governor Type |
Generator Set Monitoring System (GMS) |
Generator Set Dimensions
+
-
| Length - Maximum |
404in |
| Width - Maximum |
99.62in |
| Height - Maximum |
156.6in |
| Dry Weight - Genset (maximum) |
91050lb |
Standard Equipment:
Air Inlet System
+
-
-
Aftercooler, fresh water, corrosion resistant coated (air side)
-
Breather, crankcase, top-mounted
-
Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
-
Air inlet shutoff
Cooling System
+
-
-
Engine coolant water drains
-
Jacket water thermostats
-
Water temperature regulator
Exhaust System
+
-
-
Includes adapter, flexible exhaust fitting
-
457 mm (18 in) Cat bolt pattern
-
Dry, gas tight, exhaust manifold
Generator System
+
-
-
Custom generator per generator data sheet completed by dealer
Lube System
+
-
-
Oil filler and dipstick
-
Crankcase explosion relief valves
-
Oil pressure regulating valve
-
Service side engine mounted on cylinder block inspection covers
-
Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
-
Centrifugal oil filters with single shutoff
Mounting System
+
-
-
Engine and generator mounting
-
Damper, torsional vibration
Starting / Charging System
+
-
-
Air silencer
-
Vane type air starter
-
One motor, engine mounted at rear, on left side
-
Line group for single point custom connection
General:
+
-
-
Paint, Caterpillar yellow
-
Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
Optional Equipment:
Air Inlet System
+
-
Air cleaner louver assembly
Boost control valve
Soot filter
Vertical support bracket
Heavy duty air cleaner
Air inlet adapter
Cooling System
+
-
Heating aids
Auxiliary water pump
Cooling system aids
Expansion tank
Exhaust System
+
-
Weld flange and related hardware
Flexible exhaust fittings
Fuel System
+
-
Fuel priming pump
Fuel system connections
Duplex primary fuel strainer
Generator System
+
-
3 Phase, six Leads, WYE
Class F insulation
Busbar connections
Winding temperature detectors
Anti-condensation space heaters
Governor System
+
-
Battery backup/power supply
EGB actuator
2301 A load share
Electronic/actuators
Digital programmers
723 Plus
Lube System
+
-
Oil pan drain valve
Lube ANSI adapter (Emergency connection)
Mounting System
+
-
Spring type vibration isolators
Isolator
Vertically restrained
Non-vertically restrained
Starting / Charging System
+
-
Pressure reducing valve
Compressed air flex hose
