G3520 2500kW Gas Generator Set
At a Glance
|
Gas Standby Rating
2500 ekW @ 0.8pf
|
|
Fuel Type
Natural Gas, Hydrogen Blend (up to 5%)
|
|
Emissions/Fuel Strategy
U.S. EPA Stationary Non-Emergency Certified
|
|
RPM
1800 rpm
|
Request a Quote
Overview
Generator Set Specifications
+
-
| Gas Standby Rating |
2500 ekW @ 0.8pf |
| Fuel Type |
Natural Gas, Hydrogen Blend (up to 5%) |
| Emissions/Fuel Strategy |
U.S. EPA Stationary Non-Emergency Certified |
| RPM |
1800 rpm |
| Frequency |
60 Hz |
| Compression Ratio |
11.5 |
Engine Specifications
+
-
| Engine Model |
G3520 |
| Displacement |
5956in³ |
| Aspiration |
TA |
| Bore |
6.7in |
| Stroke |
8.5in |
Generator Set Dimensions
+
-
| Length |
336in |
| Width |
94in |
| Height |
128in |
| Weight |
48500lb |
Standard Equipment:
Air Inlet
+
-
-
Two-element single-stage air cleaner with enclosure and service indicator
Cooling
+
-
-
Jacket water and SCAC engine-driven pumps
-
Jacket water and SCAC thermostats
Exhaust
+
-
-
Cat-flanged face outlet on turbocharger
-
Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns
-
Dry exhaust manifolds, insulated and shielded
Fuel System
+
-
-
Gas pressure regulator
-
Engine-installed electronic control valve
-
Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
-
24V DC energized-to-run (ETR) gas shutoff valve
-
Throttle plate, 24V DC actuator, controlled by GECM
General
+
-
-
Crankshaft vibration damper and guard
-
Operation and maintenance manuals
-
RH Service
-
Paint- Caterpillar Yellow with high gloss black rails and radiator
-
Parts book
Generator
+
-
-
SR5
-
Permanent Magnet Excitiation
-
NEMA Class H insulation
-
Winding temperature detectors
-
Integrated voltage regulator (IVR)
-
Anti-condensation space heater
Starting/charging
+
-
-
Battery with cables and rack (shipped loose)
-
24V starting motors
-
Electric Starter
-
Jacket water heater
Ignition System
+
-
-
Electronic Ignition System (controlled by ADEM A4)
-
Individual Cylinder Detonation Sensitive Timing (DST)
Optional Equipment:
Air Inlet
+
-
Air cleaner with precleaner
Control Panel
+
-
Local alarm module
EMCP 4.4
Remote annunciator
Remote PC monitoring
Engine failure relay
Local PC monitoring
Circuit Breakers
+
-
2000A, 2500A, 3000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers
100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating
3-pole (IEC 947-2 rated)
Frame mounting
1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers
S LSI, G LSIG, P LSIG-P, 4th Digit Type
Cooling
+
-
Coolant level drain line with valves, fan with guard
Package mounted radiator
Exhaust
+
-
305 mm (12 in.) muffler
305 mm (12in.) elbow
18, 25 dBA Attenuation
305 mm (12 in.) flange
305mm (12 in) spark arresting muffler
Fuel System
+
-
3, 0-100 kPag, 4-20mA gas train pressure sensors
Generator
+
-
Low voltage extension box
Bearing temperature detectors
European bus bars
Cable access box
Generator air filter
Starting/charging
+
-
45A, 24V charging alternator (requires engine driven pumps)
20A, 24VDC battery charger
