Cat EGP Switchgear
At a Glance
|
Configuration
Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie and load breakers in conjunction with downstream transfer switches for standby or emergency applications
|
|
Modes of Operation
Multi-unit Island and multi-unit standby mode with optional redundant controls and components.
|
|
Application
LV and MV (208V - 38 kV)
|
|
ANSI Protective Devices
15/25, 27/59, 81 O/U, 32, 40, 50, 51
|
Get More Information
Overview
EGP (Emergency Generator Paralleling) switchgear is used for paralleling multiple generators that are not directly connected to a utility source.
Expand All +
Technical Summary
+
-
| Configuration |
Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie and load breakers in conjunction with downstream transfer switches for standby or emergency applications |
| Modes of Operation |
Multi-unit Island and multi-unit standby mode with optional redundant controls and components. |
| Application |
LV and MV (208V - 38 kV) |
Generator Protective Devices
+
-
| ANSI Protective Devices |
15/25, 27/59, 81 O/U, 32, 40, 50, 51 |
Environmental Parameters
+
-
| Certifications |
IBC, CBC, UBC & OSHPD Certified |
| Control Panel Enclosure |
NEMA 1 or NEMA 3R Freestanding Construction |
| Operating Temperature |
0°C to 50°C |
| Storage Temperature |
-20°C to +60°C |
| Low Voltage Standards |
NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 |
| Medium Voltage Standards |
NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 |
Standard Equipment:
Egp Switchgear
-
Choice of 19” Surface Acoustic Wave Color or 15” Resistive Color Touchscreen
-
Emergency Stop Button for each generator
-
Instant Auto Switch
-
Generator Demand Priority Control
-
Audible Alarm & Horn Silence Button
-
Circuit Breaker Control Switch with Indicators
Optional Equipment:
Data Table Interface
* Accomodates interface with a building management system for monitoring all system parameters via Modbus RTU or TCP
Supplemental Hardware Synchronization Check Relay (ansi 25 Device)
* Provides additional discrete synchronization protection
Remote Power Monitoring System
* To monitor breaker status, alarms, metering and other operating parameters
*This estimate is for the base rental charge only. Other fees and charges may apply and will be calculated at the time of rental. Does not include delivery fees.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.
