Menu
View Details

Tap to Call

289D3 Compact Track Loader

289D3 Compact Track Loader

At a Glance

Gross Power - SAE J1995
74.3 HP
Rated Operating Capacities - 35% Tipping Load
2890 lb
Operating Weight
10688 lb
Net Power - SAE 1349
72.9 HP
Request a Demo

Overview

Engine

+ -
Gross Power - SAE J1995 74.3HP
Net Power - SAE 1349 72.9HP
Displacement 203in³
Bore 3.7in
Stroke 4.7in
Net Power 72.9HP
Engine Model Cat C3.3B DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995 195ft·lbf
Net Power - ISO 9249 73.7HP

Operating Specifications

+ -
Rated Operating Capacities - 35% Tipping Load 2890lb
Tipping Load 8255lb
Breakout Force - Tilt Cylinder 7291lb
Rated Operating Capacity with Optional Counterweight 4370lb
Rated Operating Capacities - 50% Tipping Load 4130lb
Ground Pressure - With 450 mm/17.7 in Track 4.7psi
Ground Contact Area - With 450 mm/17.7 in Track 2272in²
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr

Weights

+ -
Operating Weight 10688lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr

Service Refill Capacities

+ -
Cooling System 3.7gal (US)
Engine Crankcase 3gal (US)
Fuel Tank 27.7gal (US)
Hydraulic System 13.7gal (US)
Hydraulic Tank 10.3gal (US)

Dimensions

+ -
Length - Track on Ground 64.2in
Overall Length - Track 83.8in
Height - Top of Cab 83.2in
Ground Clearance 8.9in
Departure Angle 33°
Maximum Dump Angle 51°
Clearance at Maximum Lift and Dump 94in
Turning Radius from Center - Machine Rear 70.7in
Length - Without Bucket 117.9in
Maximum Reach - With Arms Parallel to Ground 50in
Turning Radius from Center - Bucket 88.8in
Bucket Pin Height - Carry Position 7.5in
Turning Radius from Center - Coupler 55.5in
Bucket Pin Height - Maximum Lift 125.1in
Reach - Maximum Lift/Dump 30in
Length - With Bucket on Ground 146.2in
Maximum Overall Height 158.1in
Rack Back Angle - Maximum Height 84°
Bucket Pin Reach - Maximum Lift 14.5in
Vehicle Width (450 mm/17.7 in tracks) 78in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr

Cab

+ -
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

Hydraulic System

+ -
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 44HP
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure 4061psi
Hydraulic Flow - Standard - Loader Hydraulic Flow 23psi
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) 76HP
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow 32gal/min

Power Train

+ -
Travel Speed - Forward or Reverse - Two Speed 8.3mile/h
Travel Speed - Forward or Reverse - One Speed 4.5mile/h

Air Conditioning System (if equipped)

+ -
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.

Noise Level

+ -
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Outside Cab*** 103dB(A)
Inside Cab** 83dB(A)
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.