| Model Number |
SG18B |
| Required Hydraulics |
High Flow XPS |
| Cutting Wheel Diameter - With Teeth |
21.5in |
| Cutting Depth - Below Ground |
20.5in |
| Cutting Head Extension |
11in |
| Cutting Head Speed at Maximum Flow |
1230 rpm |
| Cutting Head Swing Range |
70 degrees |
| Cutting Height - Above Ground |
18.5in |
| Cutting Wheel Width - With Teeth |
3.3in |
| Cutting Width - Full Swing Range |
60in |
| Drive Method |
Gerotor Motor- Direct |
| Drive Shaft Torque at Maximum Pressure |
345.9lb/ft |
| Motor Displacement |
6.1in³ |
| Optimal Hydraulic Pressure |
207-310 bar (3000-4500 psi) |
| Overall Height |
32in |
| Overall Length |
68.4in |
| Overall Width |
46.3in |
| Optimal Hydraulic Flow |
95-125 L/min (25-33 gpm) |
| Weight |
881.8lb |
| Number of Carbide Teeth per Cutting Wheel |
32 |
