Menu
x
View Details

Tap to Call Find a Sales Rep

2014 980M Wheel Loader

980M Wheel Loader

At a Glance

Net Power - ISO 9249
386 hp
Net Power - ISO 9249
386 HP
Operating Weight
66337 lb
Operating Weight
66337 lb
Get More Information

Rates

Please call 1-866-551-4602 for rates.

Overview

The new 980M Wheel Loader has either a Tier 2/Stage II, Tier 3/Stage IIIA equivalent or Tier 4 Final/Stage IV, depending on emission standards of specific country, engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet your high expectations for productivity and fuel efficiency. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to you. The reliability, durability, and versatility of the 980M result in a machine that is better built to meet your needs.

Expand All +

Engine

+ -
Net Power - ISO 9249 386hp
Net Power - ISO 9249 386HP
Engine Model Cat® C13 ACERT™
Engine Model Cat? C13 ACERT?
Bore 5.12in
Stroke 6.18in
Displacement 763.0in3
U.S. EPA Tier 4 Final/EU Stage IV - Maximum Power - SAE J1995 425HP
Tier 2/Stage II, Tier 3/Stage IIIA Equivalent: Maximum Power – SAE J1995 412hp
Maximum Net Power (1,700 rpm) – SAE J1349 386.0hp
Maximum Net Power – SAE J1349 386.0hp
Maximum Net Torque (1,100 rpm) – SAE J1349 1515.0lbf-ft
Peak Gross Torque (1,200 rpm) – SAE J1995 1627.0lbf-ft
Emissions Cat engine with ACERT Technology – meets Tier 4 Final emission standards.
Note The power ratings apply at the stated speed when tested under the reference conditions for the specified standards.
Note The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment.
Note The gross power advertised is with the fan at maximum speed.
Tier 2/Stage II, Tier 3/Stage IIIA Equivalent: Maximum Power - SAE J1995 412HP

Weights

+ -
Operating Weight 66337lb
Operating Weight 66337lb
Note For 5.4 m3 (7.1 yd3) general purpose buckets with BOCE.
Note Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and
Note (1) For 5.4 m3 (7.1 yd3) general purpose buckets with BOCE.
Note (2) Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and

Buckets

+ -
Bucket Capacities 4.2-12.2 m3 (5.25-16.0 yd3)
Bucket Capacities 4.2-12.2 m3 (5.25-16.0 yd3)

Transmission

+ -
Forward 1 4.3mph
Forward - 1 4.3mile/h
Forward 2 8.3mph
Forward - 2 8.3mile/h
Forward 3 14.6mph
Forward - 3 14.6mile/h
Forward 4 24.5mph
Forward - 4 24.5mile/h
Reverse 1 4.8mph
Reverse - 1 4.8mile/h
Reverse 2 9.4mph
Reverse - 2 9.4mile/h
Reverse 3 16.7mph
Reverse - 3 16.7mile/h
Reverse 4 24.5mph
Reverse - 4 24.5mile/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius.
Note Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius.

Axles

+ -
Front Fixed
Front Fixed
Rear Oscillating ±13 degrees
Rear Oscillating ?13 degrees
Maximum Single-Wheel Rise and Fall 1.87ft
Maximum Single-Wheel Rise and Fall 1.87ft

Brakes

+ -
Brakes Brakes meet ISO 3450:2011 standards
Brakes Brakes meet ISO 3450:2011 standards

Cab

+ -
ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

Operating Specifications

+ -
Breakout Force 50357lbf
Breakout Force 50357lb
Static Tipping Load – Full 40° Turn: No Tire Deflection 45847lb
Static Tipping Load – Full 40° Turn: With Tire Deflection 43133lb
Note Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection 45847lb
Static Tipping Load - Full 40° Turn - With Tire Deflection 43133lb
Note Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Hydraulic System

+ -
Hydraulic Cycle Time - Rated Payload - Dump, at Maximum Raise 1.7s
Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down 3.1s
Hydraulic Cycle Time - Rated Payload - Raise from Carry Position 5.3s
Hydraulic Cycle Time - Rated Payload - Total 10.1s
Implement Pump Type Variable Displacement Piston
Implement System - Maximum Operating Pressure 4975psi
Implement System: Maximum Pump Output (2,250 rpm) 119gal/min
Implement System: Optional 3rd Function Maximum Flow 63gal/min
Implement System: Optional 3rd Function Maximum Pressure 3159psi
Implement System - Maximum Pump Output at 2,250 rpm 119gal/min
Implement System - Optional 3rd Function Maximum Flow 63gal/min
Implement System - Optional 3rd Function Maximum Pressure 3159psi

Service Refill Capacities

+ -
Cooling System 14.0gal
Crankcase 9.8gal
Transmission 20.3gal
Differentials and Final Drives – Front 22gal
Differentials and Final Drives – Rear 22gal
Hydraulic Tank 40gal
DEF Tank 5.5gal
Fuel Tank 112.5gal
Cooling System 14gal (US)
Crankcase 9.8gal (US)
DEF Tank 5.5gal (US)
Differential - Final Drives - Front 22gal (US)
Differential - Final Drives - Rear 22gal (US)
Fuel Tank 112.5gal (US)
Hydraulic Tank 40gal (US)
Transmission 20.3gal (US)

Sound (Tier 2/Stage II, Tier 3/Stage IIIA equivalent)

+ -
Exterior Sound Power Level (ISO 6395:2008)* 112dB(A)
Exterior Sound Pressure Level (SAE J88:2013)** 78dB(A)
Note The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not proper
Note *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
Note **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum

Sound

+ -
Note The sound values are for specific operating conditions only.

Sound - Tier 2/Stage II, Tier 3/Stage IIIA Equivalent

+ -
Operator Sound Pressure Level - ISO 6396:2008 75dB(A)
Exterior Sound Power Level - ISO 6395:2008* 112dB(A)
Exterior Sound Pressure Level - SAE J88:2013** 78dB(A)
Note (1) The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not proper
Note (2) *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
Note (3) **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum

Engine - Tier 2/Stage II, Tier 3/Stage IIIA Equivalent

+ -
Engine Model Cat C13 ACERT
Maximum Power - 1,800 rpm - SAE J1995 417HP
Maximum Net Power - 1,800 rpm - SAE J1349 373HP
Peak Gross Torque - 1,300 rpm - SAE J1995 1617ft·lbf
Maximum Net Torque - 1,000 rpm - SAE J1349 1505ft·lbf
Bore 5.12in
Stroke 6.18in
Displacement 763in³
Emissions Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards.

Engine (Tier 4 Final/Stage IV)

+ -
Engine Model Cat C13 ACERT
Maximum Net Power (1,700 rpm) – SAE J1349 386hp
Peak Gross Torque (1,200 rpm) – SAE J1995 1627lbf-ft
Maximum Net Torque (1,100 rpm) – SAE J1349 1515lbf-ft
Bore 5.12in
Stroke 6.18in
Displacement 763in3
Emissions Cat engine with ACERT Technology – meets Tier 4 Final/Stage IV emission standards.
Note The power ratings apply at the stated speed when tested under the reference conditions for the specified standards.
Note The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment.
Note The gross power advertised is with the fan at maximum speed.

Engine - Tier 4 Final/Stage IV

+ -
Maximum Power - 1,700 rpm - SAE J1995 425HP
Bore 5.12in
Displacement 763in³
Emissions Cat engine with ACERT Technology ? meets Tier 4 Final/Stage IV emission standards.
Engine Model Cat C13 ACERT
Maximum Net Power - 1,700 rpm - SAE J1349 386HP
Maximum Net Torque - 1,100 rpm - SAE J1349 1515ft·lbf
Note (1) The power ratings apply at the stated speed when tested under the reference conditions for the specified standards.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment.
Note (3) The gross power advertised is with the fan at maximum speed.
Peak Gross Torque - 1,200 rpm - SAE J1995 1627ft·lbf
Stroke 6.18in

Sound - Tier 4 Final/Stage IV

+ -
Note (1) The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not proper
Operator Sound Pressure Level - ISO 6396:2008 72dB(A)
Exterior Sound Power Level - ISO 6395:2008* 112dB(A)
Exterior Sound Pressure Level - SAE J88:2013** 78dB(A)
Note (2) *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
Note (3) **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum
*This estimate is for the base rental charge only. Other fees and charges may apply and will be calculated at the time of rental. Does not include delivery fees.
*Images are for general reference only. Individual product models may vary. Please consult with your dealer to verify machine configuration.